Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T07:50:15.457Z Has data issue: false hasContentIssue false

Clearance and lubricant selection for avoiding seizure in a circumferential groove journal bearing based on a lumped model analysis

Published online by Cambridge University Press:  04 November 2011

Alex-Florian Cristea*
Affiliation:
University Politehnica Bucharest, Mechanical Engineering & Mechatronics Faculty, Machine Elements & Tribology Department, Splaiul Independentei 313, Bucharest 060042, RomaniaInstitut Pprime, CNRS, Université de Poitiers, ENSMA, UPR 3346, Dép. Génie Mécanique et Systèmes Complexes, SP2MI, 11 boulevard Marie et Pierre Curie, BP 30179, 86962 Futuroscope Chasseneuil Cedex, France
Mircea Pascovici
Affiliation:
University Politehnica Bucharest, Mechanical Engineering & Mechatronics Faculty, Machine Elements & Tribology Department, Splaiul Independentei 313, Bucharest 060042, Romania
Michel Fillon
Affiliation:
Institut Pprime, CNRS, Université de Poitiers, ENSMA, UPR 3346, Dép. Génie Mécanique et Systèmes Complexes, SP2MI, 11 boulevard Marie et Pierre Curie, BP 30179, 86962 Futuroscope Chasseneuil Cedex, France
*
aCorresponding author: acristea@omtr.pub.ro
Get access

Abstract

This study presents a new simple lumped model for analyzing the thermally induced seizure of fully lubricated eccentric circumferential groove journal bearings (CGJB). The model represents a significant upgrade of a previous seizure lumped model developed by Pascovici & Kucinschi, in 2002. Main upgrades consist of: eccentric operation, introduction of hydrodynamic lubricant flow rate component, and evaluation of friction power losses based on the short bearing theory with Barwell’s hypothesis on the divergent zone. The viscosity–temperature variation is replaced with Tipei’s viscosity-clearance relationship, as in the previous model. The decrease of viscosity, as a consequence of temperature increase, does not always limit clearance loss, and the seizure process ends with a concentric journal-bushing merged system. Although CGJB’s are less sensitive to this seizure mechanism, the threat still exists and must be avoided. As a result, bearing designers and users should check whether if several safe-operation criteria are met. A recent Institute Pprime experiment on CGJB’s provided a base set of operating parameters, from which numerical simulations have been performed to determine in what conditions the CGJB fails, under thermally induced seizure.

Information

Type
Research Article
Copyright
© AFM, EDP Sciences 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable