Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T11:50:20.191Z Has data issue: false hasContentIssue false

Crashworthiness analysis of a lock gate impacted by two different river ships

Published online by Cambridge University Press:  16 December 2004

Jean-Claude Rodet
Affiliation:
ECMT, 90 rue Pierre Brunier, 69300 Caluire, France
Hervé Le Sourne
Affiliation:
Principia Marine, 1 rue de la Noë, BP 22212, 44321 Nantes Cedex 3, France
Get access

Abstract

The objective of this paper is to present an analytical model for the crashworthiness analysis of plane lock gates impacted by river ships. The model is able to assess the indentation by the colliding ship at impact point, to detect possible failure in impact vicinity and to estimate the actions on gate bearings. These latter are calculated by assuming the crash to a quasi-static load, and linear reactions distributions along the bearings. The gate geometry, the bow shape of the colliding ship, its initial velocity and the impact location on the gate, are taken into account. The ships are assumed to be quite rigid with respect to the gate. The modeling has been developed with Matlab. Results of impact of one given lock gate with two different ships: a passenger vessel and a carrier, are compared with FEM results. Impact forces and maximum indentation are well matched. Actions on bearings can be locally rather different because of their time dependence and the non-linearity of their distributions.

Information

Type
Research Article
Copyright
© AFM, EDP Sciences, 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable