Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T21:17:19.960Z Has data issue: false hasContentIssue false

Evaluating the effect of tolerances on the functionalrequirements of assemblies

Published online by Cambridge University Press:  12 June 2013

Mehdi Tlija
Affiliation:
LGM, ENIM, University of Monastir, Av. Ibn Eljazzar, 5019 Monastir, Tunisia
Borhen Louhichi*
Affiliation:
LGM, ENIM, University of Monastir, Av. Ibn Eljazzar, 5019 Monastir, TunisiaLIPPS, ÉTS, 1100 Notre-Dame Ouest, Montréal, H3C1K3 Québec, Canada
Abdelmajid BenAmara
Affiliation:
LGM, ENIM, University of Monastir, Av. Ibn Eljazzar, 5019 Monastir, Tunisia
*
a Corresponding author:Borhen.Louhichi@etsmtl.ca

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In order to improve digital mock-up, a tolerancing phase should be integrated in thegeometric models. However, in CAD software, tolerances are represented by annotations,which are neglected as well as the tolerance impact. Thus, the system malfunction isgenerated. For these reasons, in this paper a tolerancing phase is integrated in thenumerical model to form a realistic model, where worst case configurations of assembliesare determined from the tolerances assigned to the nominal model. The proposed modelincorporates tolerances on CAD models in the case of planar face, cylindrical face andplanar face with non quadratic loop. In addition, the model ability to respect the maximummaterial condition (MMC) and the requirement of datum priority order in the CAD models isshown. Finally, functional requirement of a linear guide mechanism is inspected by usingthe proposed model.

Information

Type
Research Article
Copyright
© AFM, EDP Sciences 2013