Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-19T00:06:22.778Z Has data issue: false hasContentIssue false

Experimental study and superplastic rheological characterization of Ti-6Al-4V

Published online by Cambridge University Press:  19 November 2004

David Ollivier
Affiliation:
EMT, ENSAM CER d'Angers, 2 Bd du Ronceray, BP 3525, 49035 Angers Cedex, France
Youssef Aoura
Affiliation:
EMT, ENSAM CER d'Angers, 2 Bd du Ronceray, BP 3525, 49035 Angers Cedex, France
Abdelhak Ambari
Affiliation:
EMT, ENSAM CER d'Angers, 2 Bd du Ronceray, BP 3525, 49035 Angers Cedex, France
Serge Boude
Affiliation:
EMT, ENSAM CER d'Angers, 2 Bd du Ronceray, BP 3525, 49035 Angers Cedex, France
Get access

Abstract

The superplastic behaviour of a titanium alloy base Ti-6Al-4V during biaxial test was investigated. A numerical model using a finite element method is proposed to examine the superplastic deformation behaviour of an appropriate axisymmetric shaped part. An experimental procedure based on the measurement of the pressure applied and the height of the dome apex of the formed part, is used to identify the rheological parameters of the material behaviour law. This identification was carried out by comparisons between the results of simulation and experimentation relating to thickness, equivalent strain and stress. Three inflation tests were carried out at different equivalent strain rates (4×10-4, 6×10-4 and 8×10-4 s-1).This procedure is applied successfully to the forming of an industrial part. Indeed, this study henceforth allows one to predict thickness evolution in any point of an industrial part for an optimization of its uniformity.

Information

Type
Research Article
Copyright
© AFM, EDP Sciences, 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable