Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-14T11:46:14.404Z Has data issue: false hasContentIssue false
  • English
  • Français

Materials selection for eco-aware lightweight frictionmaterial

Published online by Cambridge University Press:  20 June 2014

A. Mustafa,
M.F.B. Abdollah,
N. Ismail,
H. Amiruddin and
N. Umehara
A. Mustafa
Affiliation:
Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
M.F.B. Abdollah*
Affiliation:
Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, MalaysiaCentre for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
N. Ismail
Affiliation:
Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, MalaysiaCentre for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
H. Amiruddin
Affiliation:
Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, MalaysiaCentre for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
N. Umehara
Affiliation:
Department of Mechanical Science and Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
*
a Corresponding author:mohdfadzli@utem.edu.my

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In the automotive industry, non-asbestos based components, such as brake pads, have beenin high demand due to environmental and human health concerns. Therefore, the purpose ofthis study is to select an alternative friction material, which is eco-aware lightweight,cost effective, and non-toxic. This will be accomplished using Cambridge EngineeringSelector (CES) Edupack software, embedded within an Eco-Audit Tool. For verification, acomparative study using the Pugh method was also investigated. The results show thatKenaf, which is a commodity plant in Malaysia, is the most suitable alternative frictionmaterial that passes all of the design stages and consumes less energy, compared toasbestos and other potential materials.

Keywords

Eco-lightweightfriction materialsCES EdupackPugh method

Information

Type
Research Article
Information
Mechanics & Industry , Volume 15 , Issue 4 , 2014, pp. 279 - 285
Copyright
© AFM, EDP Sciences 2014

References

Zhang, Y., Lai, X., Zhu, P., Wang, W., Mater. Design 27 (2006) 64–68 CrossRef
Abdollah, M.F.B., Hassan, R., J. Mech. Eng. Technol. 5 (2013) 11–18
Chan, D., Stachpwiak, G.W., Proc. Instit. Mech. Eng. D: J. Automobile Eng. 218 (2004) 953–966 CrossRef
P.J. Blau, Compositions, Functions, and Testing of Friction Materials and Their Additives. OAK Ridge National Laboratory Report ORNL/TM 2001/64, Oak Ridge, Tennesse, 2001, pp. 1–29
Eriksson, M., Bergman, F., Jacobson, S., Wear 232 (1999) 163−167 CrossRef
Bergman, F., Eriksson, M., Jacobson, S., Wear 299 (1999) 62–628
Kim, S., Jang, H., Tribol. Int. 33 (2000) 477–484 CrossRef
Ramazzini, C., Call for an International Ban on Asbestos, Environment Resolution 83 (2000) 79–81 Google Scholar
Han, L., Huang, L., Zhang, J., Lu, Y., Sci. Technol. 66 (2006) 505–513
Yousif, B.F., Nirmal, U., Wong, K.J., Composite 31 (2010) 4514–4521
Hashmi, S.A.R., Dwivedi, U.K., Navin, G., Wear 262 (2007) 1426–1432 CrossRef
Acha, B.A., Marcovich, N.E., Reboredo, M.M., J. Polymer Sci. 262 (2005) 736–741
Liu, Q., Hughes, M., Composites A: Appl. Sci. Manufact. 39 (2011) 1644–1652 CrossRef
El-Tayeb, N.S.M., Wear 39 (2008) 223–235 CrossRef
Yunhai, M., Shenglong, S., Jin, T., Wei, Y., Yazhou, Y., Jiang, Z., J. Thermoplastic Composite Mater. 26 (2010) 845–859
M.F. Ashby, D. Cebon, Teaching Engineering Materials: The CES Edupack. Engineering Department, Cambridge University, 2007, pp. 1−13
J. O’Hare, E. Cope, S. Warde, Five steps to Eco Design, Improving the Environmental Performance of Products through Design. Granta Design Limited, 2011, pp. 1–12
S. Katsuhiro, G. Akira, Y. Satoshi, A. Yuichi, N. Koji, Development of Brake Friction Material, Honda Research and Development Co. Ltd., 1993, pp. 149-161
R.J. Talib, S.S. Mohmad, and K. Ramlan, Selection of Best Formulation for Semi-Metallic Brake Friction Materials Development, Powder Metallurgy, Dr Katsuyoshi Kondoh (Ed.), ISBN:978-953-51-0071-3, InTech. Available from: http://www.intechopen.com/books/powder-metallurgy/ Selection-of-Best-Formulation-for-Semi-Metallic-Brake-Friction-Materials-Development, 2012.
M.G. Jacko, S.K. Rhee, B. Linings, C. Facing, In: M. Grayson, (ed.), Encyclopedia of Composite Materials and Component, John Wiley and Sons, USA, 1995, pp. 144–154
Kinkaid, N.M., O’Reilly, O.M., Papadopoulos, P., J. Sound Vib. 267 (2003) 105–166 CrossRef
Cueva, G., Sinatora, A., Guesser, W.L., Tschiptschin, A.P., Wear 255 (2003) 1256–1260 CrossRef
Han, L., Huang, L., Zhang, J., Lu, Y., Compos. Sci. Technol. 66 (2006) 2895–2906 CrossRef
Yun, R., Lu, Y., Filip, P., Tribology Int. 43 (2010) 2010−2019 CrossRef
EL-Tayeb, N.S.M., Liew, K.W., Wear 266 (2009) 275−287 CrossRef
Bhabani, K.S., Amar, P., Nandan, D., Prasanta, R., Bharat, S.T., J. Eng. Technol. 226 (2012) 439–445
M.F. Ashby, D. Cebon, Case studies in material selection, Granta Design Limited, Cambridge, 1996
Kima, Y.C., Cho, M.H., Kim, S.J., Jang, H., Wear 264 (2008) 204–210CrossRef