Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-19T01:43:23.554Z Has data issue: false hasContentIssue false

Spectral Kurtosis against SVM for best frequency selection inbearing diagnostics

Published online by Cambridge University Press:  09 December 2010

Alessandro Fasana
Affiliation:
Dipartimento di Meccanica, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
Stefano Marchesiello
Affiliation:
Dipartimento di Meccanica, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
Miriam Pirra
Affiliation:
Dipartimento di Meccanica, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
Luigi Garibaldi*
Affiliation:
Dipartimento di Meccanica, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
Alessandra Torri
Affiliation:
Avio S.p.A. Strada del Drosso 145, 10135 Torino, Italy
*
a Corresponding author:luigi.garibaldi@polito.it
Get access

Abstract

Rolling bearing is probably the most widely used component in rotating mechanicalequipments and its condition monitoring and fault diagnosis to prevent the occurrence ofbreakdown is growing in interest since many years. Vibration signal based methods are themost popular and have been adopted in many kinds of condition monitoring systems. Startingin the early 60, an immense range of different methods has been proposed on this basis, toperform diagnosis, fault identification and classification of bearing faults. Among theothers, one typical approach consists in deep analysis of the most informative frequencyrange output of the system under test; the identification of this band is notstraightforward because the fundamental task consists in finding out the band which is themost informative in contents which, in turn, might not be corresponding to that one of themaximum response, as claimed by some authors. In this paper, Spectral Kurtosis and SupportVector Machine are analysed and compared and it is shown that they typically reach similarresults, in spite of their totally different approach. A brief description of both methodsis given and laboratory data are analysed from a lab rig which uses spare parts of a fullsize power transmission gearbox, designed by AVIO. By taking advantage of thesecomparisons, the analyses are conducted using classical indicators applied to the specificbands suggested by previous analysis such as the RMS and other statistical quantities.Multi dimensional graphs are reported to show the reliability of the obtained results.

Information

Type
Research Article
Copyright
© AFM, EDP Sciences 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable