Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T06:19:50.940Z Has data issue: false hasContentIssue false

Thermo-economic modeling of an atmospheric SOFC/CHP cycle: anexergy based approach

Published online by Cambridge University Press:  28 March 2014

Ghasem Arab
Affiliation:
Department of Energy Engineering, College of Energy and Environment, Tehran Science and Research Branch, Islamic Azad University, Tehran, Iran
Hossein Ghadamian*
Affiliation:
Department of Energy, Materials and Energy Research Center (MERC), P.O. Box 14155-4777, Tehran, Iran
Saeed Abbasi
Affiliation:
Department of Machine Design, Royal Institute of Technology (KTH), SE 10044 Stockholm, Sweden
*
a Corresponding author:h.ghadamian@merc.ac.ir

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Sustainability is one of the challenging issues in electricity production systems.Recently, solid oxide fuel cell (SOFC) has been suggested for use in combined heat andpower (CHP) systems. This application is introduced as a promisingenvironmentally-friendly system according to the thermodynamic and electrochemical models.In this paper, an atmospheric SOFC/CHP cycle was analysed based on integrating exergyconcepts, energy and mass balance equations. In this regard, a zero-dimensional energy andmass balance model was developed in engineering equation solver (EES) software. Twodimensionless parameters (the exergetic performance coefficient (EPC) for investigatingthe whole cycle, and exergetic efficiency for investigating the exergy efficiency of themain component of this cycle) were applied. Results show that efficiencies of the systemhave been increased substantially. The electrical efficiency, total efficiency and EPC ofthis cycle were ~54%,~79% and~58% respectively.Moreover, the CO2emission is 19% lower than when compared with a conventional combined power cycle fed bynatural gas. In addition, a dynamic economic evaluation was performed to extract the mostsensitive parameters affecting the outputs: electricity sales price (ESP), equipmentpurchase cost and fuel cost. Furthermore, an electricity production cost of~125 $MW.h-1 wasattributed to our model, resulting in yet further cost reduction for widespreadapplications of this cycle.

Information

Type
Research Article
Copyright
© AFM, EDP Sciences 2014