Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T09:05:46.637Z Has data issue: false hasContentIssue false

A windage power loss model based on CFD study about thevolumetric flow rate expelled by spur gears

Published online by Cambridge University Press:  22 November 2012

Sylvain Pallas
Affiliation:
Universitéde Lyon, ECAM Lyon, Laboratoire d’Énergétique, 40 montée Saint-Barthélemy, 69005 Lyon, France
Yann Marchesse*
Affiliation:
Universitéde Lyon, ECAM Lyon, Laboratoire d’Énergétique, 40 montée Saint-Barthélemy, 69005 Lyon, France
Christophe Changenet
Affiliation:
Universitéde Lyon, ECAM Lyon, Laboratoire d’Énergétique, 40 montée Saint-Barthélemy, 69005 Lyon, France
Fabrice Ville
Affiliation:
Université de Lyon, CNRS, INSA-Lyon, LaMCoS UMR 5259, 18–20 rue des Sciences, 69621 Villeurbanne, France
Philippe Velex
Affiliation:
Université de Lyon, CNRS, INSA-Lyon, LaMCoS UMR 5259, 18–20 rue des Sciences, 69621 Villeurbanne, France
*
a Corresponding author:yann.marchesse@ecam.fr

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This paper investigates the windage power losses generated by spur gears rotating in pureair by using a computational fluid dynamics (CFD) code. The three-dimensional simulationsare at first validated comparing CFD predictions with the power losses measured in similarconditions from other investigations. The volumetric flow rate which is expelled by theteeth is then analysed, and a correlation which is based on a classical approach used inturbomachinery is finally proposed which makes it possible to estimate windage losses forspur gears. It was observed that this latter approach seems satisfying since theformulation of the volumetric flow rate which is employed in the model is appropriate toeach gear.

Information

Type
Research Article
Copyright
© AFM, EDP Sciences 2012