Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T04:34:38.314Z Has data issue: false hasContentIssue false

The behavior of arsenic trioxide in non-ferrous extractivemetallurgical processing

Published online by Cambridge University Press:  14 May 2014

M. Sadegh Safarzadeh
Affiliation:
Department of Materials and Metallurgical Engineering, South Dakota School of Mines and Technology, 501 East Saint Joseph Street, Rapid City, SD 57701-3995, US. e-mail: sadegh.safarzadeh@sdsmt.edu
J.D. Miller
Affiliation:
Department of Metallurgical Engineering, College of Mines and Earth Sciences, University of Utah, 135 South 1460 East, Room 412, William C. Browning Building, Salt Lake City, UT 84112-0114, US; e-mail: jan.miller@utah.edu
H.H. Huang
Affiliation:
Department of Metallurgical and Materials Engineering, Montana Tech of The University of Montana, 215 ELC Building, 1300 West Park Street, Butte, MT 59701-8997, US; e-mail: hhuang@mtech.edu

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Study of the acid bake-leach process has shown potential advantages for the treatment ofenargite (Cu3AsS4) concentrates. Among the most important advantages of theprocess is the transformation of enargite to water-soluble copper sulfate and highlysoluble arsenic trioxide (arsenolite). Because arsenic is retained in the condensed phaseduring the baking, the vapor pressure of arsenic trioxide should be estimated at typicalbaking temperatures (e.g. 473 K). To that end, the vapor pressure of As4O6 (g) was estimated under thebaking conditions based on published thermodynamic values. The vapor pressure ofarsenolite at 473 K was found to be approximately 9.03 × 10-4 atm. Based on thelinear regression analysis of the published vapor pressure values for arsenolite in thetemperature range 366−579 K,the equation for the best fit line was found to be as follows, with a correlationcoefficient of 0.9973:

logPArsenolite(atm) = (-5780.7)/(T (K))+9.16.

Available information on arsenic trioxide does not allow a definite conclusion regardingthe arsenolite/claudetite transformation temperature and their exact melting points.However, the transition temperature has been reported to be in the wide range of240−506 K in differentreferences. Furthermore, the thermodynamic information concerning arsenolite/claudetite issparse and at times not consistent. An effort has been made in this paper to compile themost reliable thermodynamic information for arsenic trioxide (arsenolite and claudetite).

Information

Type
Research Article
Copyright
© EDP Sciences 2014