Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T00:07:10.380Z Has data issue: false hasContentIssue false

The effect of the process parameters on the solidification of thin metallic layers

Published online by Cambridge University Press:  10 August 2010

G. Albricci
Affiliation:
Politecnico di Milano – Dip. Chimica, Materiali e Ing. Chimica “Giulio Natta”, 20133 Milano, Italy
G. Coccìa
Affiliation:
Politecnico di Milano – Dip. Chimica, Materiali e Ing. Chimica “Giulio Natta”, 20133 Milano, Italy
N. Lecis
Affiliation:
Politecnico di Milano – Dip. Meccanica, 20133 Milano, Italy
Get access

Abstract

The effect of superheating and substrate morphology on heat exchange at the melt-solid interface was studied. An experimental device was set up to yield a unidirectional heat flow from the Sn-Pb bath to the lubricated steel substrate and the heat transfer resistance was evaluated from the thickness of the solidified material at a fixed time. A higher solidification efficiency was obtained with moderate superheating, and also with a proper choice of surface topography and lubricant.

Information

Type
Research Article
Copyright
© EDP Sciences

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable