Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T04:41:54.428Z Has data issue: false hasContentIssue false

A mathematical model for the dynamic desulfurization process ofultra-low-sulfur steel in the LF refining process

Published online by Cambridge University Press:  05 March 2014

Ya-nan Chen Chen
Affiliation:
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, P.R. China. e-mail: ustbchenyanan@gmail.comSchool of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, P.R. China
Yan -ping Bao
Affiliation:
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, P.R. China. e-mail: ustbchenyanan@gmail.comSchool of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, P.R. China
Min Wang
Affiliation:
National Engineering Research Center of Flat Rolling Equipment, University of Science and Technology Beijing, Beijing 100083, P.R. China
Li -hua Zhao
Affiliation:
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, P.R. China. e-mail: ustbchenyanan@gmail.comSchool of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, P.R. China
Zun Peng
Affiliation:
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, P.R. China. e-mail: ustbchenyanan@gmail.comSchool of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, P.R. China

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

In order to obtain the dynamic variation rule of the sulfur content of liquid steel inthe LF refining process, a complete mathematical model including a desulfurization kineticmodel and temperature model in the deep desulfurization process is presented, based on thepractical production and reaction mechanism of ultra-low-sulfur steel in a LF. The resultsshow that the calculated values of the sulfur content in liquid steel using the model fitthe experimental values well, and the relative error is less than 8%. The effects ofrefining slag on the desulfurization process are analyzed in this paper, which shows thatslag basicity is most important at the early and middle stages of the process, while slagweight is most important at the middle and late stages. The effect of the above factors onthe final sulfur content of liquid steel is further analyzed quantitatively. The simulatedresults provide a theoretical basis to segment control the refining process in order toachieve the maximum effect, improving efficiency, saving energy and reducingconsumption.

Information

Type
Research Article
Copyright
© EDP Sciences 2014