Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T18:12:54.263Z Has data issue: false hasContentIssue false

On the effect of nitrogen on duplex stainless steels

Published online by Cambridge University Press:  02 February 2012

S. Hertzman
Affiliation:
Outokumpu Stainless Research Foundation, Royal Institute of Technology, KTH, Brinellvägen 23, SE-100 44 Stockholm, Sweden. e-mail: Staffan.Hertzman@outokumpu.com
J. Charles
Affiliation:
GM APERAM I-R&D, La Plaine St-Denis, France; e-mail: jacques.charles@aperam.com

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

One of the key issues in the development of the modern duplex stainless steels was the introduction of nitrogen as an alloying element. This was made possible by e.g. the AOD process and has meant that the problems with earlier grades regarding weldability could be solved. The prime reason for the lower weldability, namely a coarse-grained heat affected zone with inferior properties was then removed. Further beneficial effects of nitrogen increases in the new generation of duplex grades were pointed out: localized corrosion resistance particularly in chloride containing solutions, enhancement of fatigue properties, improved creep properties particularly when considering heat treatment...The paper will outline the influence of nitrogen additions in duplex grades by means of thermodynamic calculations including phase diagrams, TTT phase precipitation diagrams from metallographic investigations, mechanical and corrosion properties. Metallographic investigations, corrosion resistance properties and mechanical properties will be presented. The specific links between welded joints microstructures and properties with different nitrogen contents will be discussed.

Information

Type
Research Article
Copyright
© EDP Sciences 2012