Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T12:10:26.647Z Has data issue: false hasContentIssue false

Sintering of ferritic and austenitic nanopowders using SparkPlasma Sintering

Published online by Cambridge University Press:  30 October 2014

B. Mouawad
Affiliation:
Université de Lyon-INSA de Lyon-MATEIS UMR CNRS 5510, 69621 Villeurbanne, France. e-mail: bassem.mouawad@insa-lyon.fr
D. Fabregue
Affiliation:
Université de Lyon-INSA de Lyon-MATEIS UMR CNRS 5510, 69621 Villeurbanne, France. e-mail: bassem.mouawad@insa-lyon.fr
M. Perez
Affiliation:
Université de Lyon-INSA de Lyon-MATEIS UMR CNRS 5510, 69621 Villeurbanne, France. e-mail: bassem.mouawad@insa-lyon.fr
M. Blat
Affiliation:
EDF R&D Dpt. MMC, Les Renardières, 77818 Moret sur Loing, France
F. Delabrouille
Affiliation:
EDF R&D Dpt. MMC, Les Renardières, 77818 Moret sur Loing, France
C. Domain
Affiliation:
EDF R&D Dpt. MMC, Les Renardières, 77818 Moret sur Loing, France
C. Pokor
Affiliation:
EDF R&D Dpt. MMC, Les Renardières, 77818 Moret sur Loing, France

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

This study aims at presenting a way to obtain nanostructured materials. Austeniticstainless steel (316L) nanopowders and ferritic/martensitic alloy steels (Fe14Cr) aresintered with the Spark Plasma Sintering (SPS) technique. This technique leads to a fullydense/nano-sized microstructure material after a short treatment. The optimal sinteringtemperature was found to be 850°C for both materials. The relationship between the Vickers Hardnessand scale of the microstructure is in good agreement with the Hall-Petch Law.

Information

Type
Research Article
Copyright
© EDP Sciences 2014