Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-19T02:52:22.311Z Has data issue: false hasContentIssue false

Tribological properties of Brass-graphitecomposite

Published online by Cambridge University Press:  02 May 2014

Zohair Sarajan*
Affiliation:
Department of Materials Science and Engineering, Yazd Branch, Islamic Azad University, Yazd, Iran Safaeeyeh, P.O.Box:89195/155. e-mail: zohairsarajan@iauyazd.ac.ir, zohairsarajan@yahoo.com

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Brass-graphite composites were fabricated by adding graphite/Cu/Zn compact powderusingthe stir-casting technique and their tribological behavior against a brass disk wasstudied under simulated actual conditions, in comparison with the common graphite/brasscomposite The tribological properties of the brass-graphite composite were compared withdifferent percentages of graphite in the structure using the pin-on-disk method. Theexperimental results showed that the 7−9 wt.% graphite creates a better wear resistance in high-pressureapplications. Continuous Zn layers successfully covered the surface of the graphiteparticles, which could contribute to the improvement of interfacial wettability betweengraphite and brass. In this study, brass-graphite composites containing 8.4 ~ 15 wt.% of Ni-coated graphitewere fabricated. The friction coefficient of composites decreased with increasing graphitecontent. The wear resistance was improved by the addition of Ni-coated graphite butdegraded at high graphite content. The results indicated this composite showed much bettermechanical properties and tribological properties in comparison with brass. The compositewith 11.7 wt.% nickel-coated graphite showed the best tribological properties.

Information

Type
Research Article
Copyright
© EDP Sciences 2014