Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T12:08:49.085Z Has data issue: false hasContentIssue false

Ion microprobe determination of rare earth elements in accessory minerals

Published online by Cambridge University Press:  05 July 2018

S. J. B. Reed*
Affiliation:
Department of Earth Sciences, University of Cambridge, Cambridge CB3 0EZ

Abstract

The application of ion microprobe analysis to REE determination is discussed, with special reference to REE-bearing accessory minerals (e.g. allanite, monazite, apatite, xenotime, sphene). The main analytical problems are shown to be (a) interferences in the mass spectrum caused by molecular ions, and (b) matrix effects, i.e. variations in ion yield with sample composition. Interference suppression using either high mass resolution or secondary-ion energy discrimination is fairly effective, but entails a significant sacrifice in peak intensity. In the absence of a viable model for predicting matrix effects, it is proposed that empirical standardization should be used. Often better absolute accuracy can be obtained by combining ion microprobe and electron microprobe data for REE present in sufficiently high concentrations. Detection limits for REE are in the part per million region at present, with spatial resolution typically around 10 μm, but there is considerable scope for improvement. Better standards and improved understanding of matrix effects should also lead to greater accuracy in quantitative analysis.

Information

Type
Mineral Chemistry
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable