Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T12:08:17.125Z Has data issue: false hasContentIssue false

Tripuhyite, FeSbO4, revisited

Published online by Cambridge University Press:  05 July 2018

P. Berlepsch*
Affiliation:
Laboratorium für chemische und mineralogische Kristallographie, Universitat Bern, Freiestrasse 3, CH-3012 Bern, Switzerland
T. Armbruster
Affiliation:
Laboratorium für chemische und mineralogische Kristallographie, Universitat Bern, Freiestrasse 3, CH-3012 Bern, Switzerland
J. Brugger
Affiliation:
The South Australian Museum & Department of Geology and Geophysics, The University of Adelaide, North Terrace, 5000 Adelaide, South Australia
A. J. Criddle
Affiliation:
Department of Mineralogy, The Natural History Museum, Cromwell Road, London SW7 5BD, UK
S. Graeser
Affiliation:
Mineralogisch-Petrographisches Institut, Universitat Basel, Bernoullistrasse 30, CH-4056 Basel, Switzerland

Abstract

The exact nature of tripuhyite remains controversial more than 100 years after the first description of the mineral. Different stoichiometries and crystal structures (rutile or tri-rutile types) have been suggested for this Fe-Sb-oxide. To address these uncertainties, we studied tripuhyite from Tripuhy, Minas Gerais, Brazil (type material) and Falotta, Grisons, Switzerland using single-crystal and powder X-ray diffraction (XRD), optical microscopy and electron microprobe analysis.

Electron microprobe analyses showed the Fe/Sb ratios to be close to one in tripuhyite from both localities. Single crystal XRD studies revealed that tripuhyite from the type locality and from Falotta have the rutile structure (P42mnm, a = 4.625(4) c = 3.059(5) and a = 4.6433(10) c= 3.0815(9) Å, respectively). Despite careful examination, no evidence for a tripled c parameter, characteristic of the tri-rutile structure, was found and hence the structure was refined with the rutile model and complete Fe-Sb disorder over the cationic sites in both cases (type material: R 1 = 3.61%; Falotta material: R 1 = 3.96%). The specular reflectance values of type material tripuhyite and lewisite were measured and the following refractive indices calculated (after Koenigsberger): tripuhyite n min = 2.14, n max = 2.27; lewisite (cubic) n = 2.04.

These results, together with those of 57Fe and 121Sb Mössbauer spectroscopy on natural and synthetic tripuhyites reported in the literature, indicate that the chemical formula of tripuhyite is Fe3+Sb5+O4 (FeSbO4). Thus, tripuhyite can no longer be attributed to the tapiolite group of minerals of general type AB 2O6. A comparison of the results presented with the mineralogical data of squawcreekite suggests that tripuhyite and squawcreekite are identical. In consequence, tripuhyite was redefined as Fe3+Sb5+O4 with a rutile-type structure. Both the proposed new formula and unit cell (rutile-type) of tripuhyite as well as the discreditation of squawcreekite have been approved by the Commission on New Mineral and Mineral Names (CNMMN) of the International Mineralogical Association (IMA).

Information

Type
Research Article
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable