Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T17:48:07.988Z Has data issue: false hasContentIssue false

Chrysotile and polygonal serpentine from the Balangero serpentinite

Published online by Cambridge University Press:  05 July 2018

Marcello Mellini*
Affiliation:
C.N.R., C.S. Geologia Strutturale e Dinamica dell' Appennino, via S. Maria 53, 56100 Pisa, Italy

Abstract

Transmission electron microscopy shows that normal chrysotile and polygonal serpentine occur together and in parallel association with balangeroite, within the slip-veins of the Balangero serpentinite. Chrysotile substitutes for balangeroite and it is later replaced by the polygonal serpentine.

The chrysotile fibres are packed together according to a rod close-packing scheme, with defects. Lattice images of the polygonal serpentine confirm the structure model proposed by Middleton and Whittaker (1976), consisting of polygonally arranged fiat layers. This structural type is probably common for serpentine minerals and constitutes a fourth main type of layer configuration in 1:1 layer silicates.

Information

Type
Mineralogy
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable