Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T21:44:33.796Z Has data issue: false hasContentIssue false

Manufacturing technology for implementing geological disposal: electroforming of copper canisters

Published online by Cambridge University Press:  02 January 2018

T. Hernandez-Selva*
Affiliation:
Materials Performance Centre, School of Materials, The University of Manchester, Manchester M13 9PL, UKBEP Surface Technologies Ltd, Eton Hill Road, Radcliffe, Manchester M26 2XT, UKResearch Centre for Radwaste and Decommissioning, The University of Manchester, Manchester M13 9PL, UK
D. L. Engelberg
Affiliation:
Materials Performance Centre, School of Materials, The University of Manchester, Manchester M13 9PL, UKResearch Centre for Radwaste and Decommissioning, The University of Manchester, Manchester M13 9PL, UK
F. Scenini
Affiliation:
Materials Performance Centre, School of Materials, The University of Manchester, Manchester M13 9PL, UKNuclear Advanced Manufacturing Centre, The University of Manchester, Manchester M13 9PL, UK
D. Fox
Affiliation:
BEP Surface Technologies Ltd, Eton Hill Road, Radcliffe, Manchester M26 2XT, UK
A. McClusky
Affiliation:
BEP Surface Technologies Ltd, Eton Hill Road, Radcliffe, Manchester M26 2XT, UK
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The existing capability and current development needs for implementing electroforming as a viable manufacturing process to produce copper cylinders with dimensions comparable to the Swedish KBS-3 design are discussed. Large freestanding copper cylinders can be produced readily, butthere is a need to address challenges associated with controlling the electro-deposition process to conform to compositional and mechanical requirements of the copper layers produced. The methodology to optimize the manufacturing process, based on a study of key parameters, such as the effectsof electrolyte additives on grain size and the chemical composition of electroformed layers, is described here. Possible ways to introduce a robust manufacturing route are also presented.

Information

Type
Research Article
Creative Commons
Creative Common License - CCCreative Common License - BY
Copyright © The Mineralogical Society of Great Britain and Ireland 2015. This is an open access article, distributed under the terms of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2015