Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T09:49:12.877Z Has data issue: false hasContentIssue false

Multispectral imaging of ore minerals in optical microscopy

Published online by Cambridge University Press:  05 July 2018

E. Pirard*
Affiliation:
Université de Liège, GeomaC –MICA, Sart Tilman B52/3, 4000 Liege, Belgium

Abstract

Multispectral imaging of ore minerals under the microscope is a logical extension of quantitative colour analysis and microspectrophotometric analysis of minerals. This paper describes, step by step, how the proper calibration of a scientific video camera can be performed in order to obtain precise reflectance measurements at each pixel within the field of view. After having reviewed the different sources of noise and aberration, practical formulae are presented that allow for the acquisition of a set of images at different wavelengths in the visible spectrum.

The advantage of using a multispectral image acquisition system based on narrow bandwidth (10 nm) interference filters is discussed and quantitatively compared to colour imaging using tristimulus (red, green, blue) filters.

Images taken from major sulphide parageneses are shown as examples of well contrasted multispectral images. Finally, the potential for automatic identification of ore minerals is discussed with reference to supervised multivariate image classification algorithms similar to those used in remote sensing. Additional comments on extending the principles for handling optical anisotropy and developing a multiradial imaging system are made.

Information

Type
Research Article
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable