Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T07:49:26.005Z Has data issue: false hasContentIssue false

Enhancing solar water evaporation with activated carbon

Published online by Cambridge University Press:  04 June 2020

Sai Kiran Hota
Affiliation:
School of Engineering, University of California Merced, Merced, CA. 95343
Gerardo Diaz
Affiliation:
School of Engineering, University of California Merced, Merced, CA. 95343
Get access

Abstract

Fresh water production through sustainable approaches such as solar thermal sources is attracting widespread attention. One of the recently developed approaches aims at utilizing black particles to enhance evaporation and steam generation through efficient photo-thermal conversion process in direct solar thermal desalination systems. Activated carbon serves as one such material for meeting the objectives of freshwater production with negligible increments in cost of the overall system. A series of chemical and physical characterizations were performed to explore the possibility of using activated carbon as a stable carbon source. Optical characterization showed granular activated carbon to have 96.35% solar absorptance and its dispersion in water to have less than 1.5% transmittance (absorbance of 1.85) at 100 mg/L concentration. Outdoor experiments were performed at the University of California-Merced in the month of September (2019), with peak irradiation of 0.8 suns. The comparative measurements showed that the total evaporation enhancement was 38% and 100% for granular activated carbon and activated carbon dispersions, respectively, when compared to pure DI water.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable