Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T15:27:18.255Z Has data issue: false hasContentIssue false

From 2-D Nanocrystalline Films to 1-D Nanomaterials: An Overview

Published online by Cambridge University Press:  19 February 2018

Chunxu Pan*
Affiliation:
Shenzhen Research Institute, Wuhan University, Shenzhen, Guangdong 518057, China.School of Physics and Technology, Wuhan University, Wuhan, Hubei 430072, China.
Jun Wu
Affiliation:
Shenzhen Research Institute, Wuhan University, Shenzhen, Guangdong 518057, China.School of Physics and Technology, Wuhan University, Wuhan, Hubei 430072, China.
Gongsheng Song
Affiliation:
Shenzhen Research Institute, Wuhan University, Shenzhen, Guangdong 518057, China.School of Physics and Technology, Wuhan University, Wuhan, Hubei 430072, China.
Chengzhi Luo
Affiliation:
Shenzhen Research Institute, Wuhan University, Shenzhen, Guangdong 518057, China.School of Physics and Technology, Wuhan University, Wuhan, Hubei 430072, China.
Delong Li
Affiliation:
School of Physics and Technology, Wuhan University, Wuhan, Hubei 430072, China.Shenzhen Key Laboratory of Thermoelectric Materials, Department of Physics, Southern University of Science and Technology, Shenzhen 518055, China.
Yueli Liu
Affiliation:
School of Physics and Technology, Wuhan University, Wuhan, Hubei 430072, China.State Key Laboratory of Silicate Materials for Architectures, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, P. R. China.
Qiang Fu
Affiliation:
School of Physics and Technology, Wuhan University, Wuhan, Hubei 430072, China.
*
Get access

Abstract

In the past few years, our group worked on the area of transformation from the two-dimensional (2-D) nanocrystalline films to one-dimensional (1-D) nanomaterials by using thermal oxidation. In this paper, we overview the research work on the controllable growth processes, transformation phenomena, growth mechanisms and applications. In general, the preparation process includes the following steps: 1) prepare a pure metal nanocrystalline film via a pulse electro – deposition; 2) grow variant 1-D nanomaterials, such as carbon nanotubes (CNTs), carbon nanofibers (CNFs), and 1-D metal oxide nanoneedles involving ZnO, CuO and Fe3O4, etc. by using this film as catalyst. This process exhibits the following features: 1) the 1-D nanomaterials grow according to “base growth” model and no residual catalyst exists at the tip of the products; 2) the diameter of the 1-D nanomaterials can be controlled by controlling grain sizes of the 2-D films through adjusting pulse electro-deposition parameters; 3) it is more easily to get the 1-D nanomaterials with large area, uniform, vertical alignment and good shape on the substrates. We propose a “solid state based-up diffusion growth mechanism” for growth of the 1-D metal oxide nanoneedles, and “base growth model” for the 1-D carbon nanomaterials. The physical properties, such as Field emission and magnetics, of the 1-D metal oxide nanoneedles were studied, which showed desired values. In addition, we couple the ZnO nanoneedles with NiO, TiO2, graphene, Au nanoparticles, etc. for enhancing photocatalytic properties in the areas of environmental purification.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable