Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T10:14:16.428Z Has data issue: false hasContentIssue false

Microstructure Analysis of Melt Spun FeN foils with α''-Fe16N2 Phase

Published online by Cambridge University Press:  03 May 2016

Md A Mehedi
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota Twin Cities, Minneapolis, Minnesota, United States
Yanfeng Jiang
Affiliation:
Department of Electrical and Computer Engineering, University of Minnesota Twin Cities, Minneapolis, Minnesota, United States
Jian-Ping Wang*
Affiliation:
Department of Electrical and Computer Engineering, University of Minnesota Twin Cities, Minneapolis, Minnesota, United States
*
*Corresponding Author: jpwang@umn.edu
Get access

Abstract

We are reporting an approach to prepare bulk foils of α″-Fe16N2 that can be directly obtained from a melt spinning process. The diffraction peaks from α″-Fe16N2 phase were found in X-ray diffraction spectrum of the foil, for which a nitrogen composition of 8.7at% was found by Auger electron spectroscopy. The microstructure of this melt spun foil was analyzed. We found 600 nm subgrains inside 8 μm grains for this foil. The coercivity of the α″-Fe16N2 foil was found as 222 Oe with a saturation magnetization of 223 emu/g. We analyzed the coercivity based on the microstructure and proposed a model to explain how to further improve it in melt spun FeN foils.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable