Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Zhou, Jiantao
Han, Xu
Li, Hui
Liu, Sheng
Shen, Shengnan
Zhou, Xin
and
Zhang, Dongqi
2021.
In-Situ Laser Polishing Additive Manufactured AlSi10Mg: Effect of Laser Polishing Strategy on Surface Morphology, Roughness and Microhardness.
Materials,
Vol. 14,
Issue. 2,
p.
393.
Thangaraju, Vinothraj Usha
Jayaseelan, Joel
Srinivasan, Sai Srish
Machado, Jose
and
Michael, Anthony Xavior
2024.
Innovations in Mechanical Engineering III.
p.
254.
Haribaskar, R
and
Kumar, T Sampath
2024.
The impact of successive laser shock peening on surface integrity and residual stress distribution of laser powder-bed fused stainless steel 316L.
Physica Scripta,
Vol. 99,
Issue. 5,
p.
055929.
Shan, Xiuyang
Pan, Zhenggao
Gao, Mengdi
Han, Lu
Choi, Joon-Phil
and
Zhang, Haining
2024.
Multi-Physics Modeling of Melting-Solidification Characteristics in Laser Powder Bed Fusion Process of 316L Stainless Steel.
Materials,
Vol. 17,
Issue. 4,
p.
946.
Prathyusha, Chityala
Jani, S P
Uppalapati, Sudhakar
Raghavulu, K. V
Lakshmi Kala, K.
Ahilan, C.
Kumar, Ashish
Chandrashekar, Rakesh
and
Vemanaboina, Harinadh
2024.
Microstructure analysis of SS316L using Selective Laser Melting.
Journal of Physics: Conference Series,
Vol. 2837,
Issue. 1,
p.
012095.
Sajgalik, Michal
Matus, Miroslav
Spuro, Peter
Joch, Richard
Czan, Andrej
and
Beranek, Libor
2025.
Analysis of the Suitability of Additive Technologies for the Production of Stainless Steel Components.
Journal of Manufacturing and Materials Processing,
Vol. 9,
Issue. 8,
p.
283.
Hou, J.
Iqbal, N.
and
Jimenez-Melero, E.
2025.
High temperature stability of laser additive manufactured stainless steel 316L structures.
Materials Today Communications,
Vol. 46,
Issue. ,
p.
112525.
Dubey, Ved Prakash
Kopec, Mateusz
Przygucka, Dominika
Pawlik, Marzena
Wood, Paul
and
Kowalewski, Zbigniew L.
2025.
Effect of the printing orientation on the yield surface and its evolution reflecting plastic pre-deformation of additively manufactured stainless steel 316L.
The International Journal of Advanced Manufacturing Technology,
Vol. 140,
Issue. 1-2,
p.
313.
Vasilevskyi, Oleksandr
Woods, Alexandra
Jones, Matthew
and
Cullinan, Michael
2025.
In situ monitoring and quality assessment of laser powder bed fusion process for 316L stainless steel.
The International Journal of Advanced Manufacturing Technology,
Vol. 140,
Issue. 11-12,
p.
6005.
Depboylu, Fatma Nur
Jegou, Loïc
Tavares, Luciana
and
Popa, Andrei-Alexandru
2025.
On joining additive manufactured metals via friction welding technology: a comprehensive mechanical and microstructural study on 316 L stainless steel components.
Additive Manufacturing Letters,
Vol. 14,
Issue. ,
p.
100309.
Zhang, Hao
Yang, Lijun
Zhang, Zhenmeng
Chen, Zhihao
Song, Ziliang
Wang, Chenyang
Wu, Xihui
and
Zhu, Xiebin
2025.
Effect of spherical Mo metal particles on microstructure and properties of 316L stainless steel during laser powder bed fusion.
Materials Research Express,
Vol. 12,
Issue. 1,
p.
016519.
Spuro, Peter
Czan, Andrej
Sajgalik, Michal
Drbúl, Mario
Roszak, Marek
Bialas, Oktawian
Sadilek, Marek
and
Mechali, Abdesselam
2026.
Microstructural Characterization, Porosity Anisotropy, and Residual Stress Fields in ADAM-Fabricated 17-4PH Stainless Steel.
Materials,
Vol. 19,
Issue. 17,
p.
3684.
Ranjbarkohan, M.
Pourkamali Anaraki, A.
and
Sazgar, A.
2026.
Experimental and Numerical Analysis of Ductile Fracture Behavior of SLM-Fabricated 316L Stainless Steel: A Study on Build Orientation Effects Using GTN Damage Model.
Arabian Journal for Science and Engineering,
Guo, Wenjie
Yan, Junxia
Ou, Bingxian
Xiong, Libin
Liu, Wenjun
and
Zhang, Donghui
2026.
Failure analysis of vanadium nitride reinforced 316L stainless steel composites prepared by selective laser melting: Microstructure evolution, fracture and wear mechanisms.
Engineering Failure Analysis,
Vol. 184,
Issue. ,
p.
110333.
Yesudhasan, Brucely
Jhon Francis, Abeens Maria
and
John Xavier Raj, Jenix Rino
2026.
Tribological behavior and surface characteristics of severe surface plastic deformed as-cast and 3D-printed SS316L using LSP.
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,
Vol. 240,
Issue. 2,
p.
1207.
Mortezaei-Semnani, Hoorshad
Ashkani, Omid
Mehrabi, Hamid
Armstrong, Mark
and
Taheri-Neyestanaki, Sina
2026.
Investigation of Wear and Fatigue Resistance of 316 L Austenitic Stainless Steel Manufactured by Laser Powder Bed Fusion.
Lasers in Manufacturing and Materials Processing,
Vol. 13,
Issue. 2,
p.
540.
Lokeshraj, Kuppusamy
Jeevanantham, A.K.
and
Prashanth, KG
2026.
Processing-driven microstructural refinement and tribocorrosion performance of SS316L: A comparative study of laser powder bed fusion and spark plasma sintering.
Applied Surface Science Advances,
Vol. 34,
Issue. ,
p.
101025.
Vemanaboina, Harinadh
Kilari, Naveen
Kumar, Kaushik
Kumar, Gulshan
Edison, Gundabattini
and
Ferro, Paolo
2026.
Emerging Trends in Manufacturing Technologies.
p.
119.
Tabin, J.
Kawałko, J.
Schob, D.
Roszak, R.
Brodecki, A.
Bała, P.
Maasch, Ph.
Kowalewski, Z.
and
Ziegenhorn, M.
2026.
Deformation-induced martensitic transformation in fused filament fabrication austenitic stainless steels during tension at wide range of temperatures (77 K, RT).
Materials Science and Engineering: A,
Vol. 950,
Issue. ,
p.
149552.
Bharath Kumar, S.
and
Swaroop, S.
2026.
Tailoring Surface and Subsurface Properties of Selective Laser Melted SS316L Subjected to Laser Shock Peening.
Journal of Materials Engineering and Performance,
Vol. 35,
Issue. 22,
p.
22182.