Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T11:21:32.542Z Has data issue: false hasContentIssue false

Parametric process optimization to improve the accuracy and mechanical properties of 3D printed parts

Published online by Cambridge University Press:  28 December 2018

Amirhossein Hakamivala
Affiliation:
Department of Bioengineering, University of Texas at Arlington, Arlington, Texas, United States
Amirali Nojoomi
Affiliation:
Department of Materials Science and Engineering, University of Texas at Arlington Arlington, Texas, United States
Alieh Aminian*
Affiliation:
BEGO Implant Systems GmbH & Co. KG, Department of Research and Development, Bremen, Germany
Arghavan Farzadi
Affiliation:
Department of Biomedical Engineering, The Ohio State University, Columbus, Ohio, United States
Noor Azuan Abu Osman
Affiliation:
Department of Biomedical Engineering, University of Malaya, Kuala Lumpur, Malaysia
*
*Alieh Aminian BEGO Implant Systems GmbH & Co. KG, Department of Research and Development, Bremen, Germany. Email: aminianalieh@gmail.com
Get access

Abstract

Investigating the mechanical properties and dimensional accuracy of 3D printed parts is an important step towards achieving optimum printing conditions. This condition, which leads to the fabrication of parts with appropriate mechanical properties and accuracy, is achieved by studying the effect of different process parameters on the final structure. In this work, Response Surface Methodology (RSM) was employed to design specified experiments to investigate the effects of layer thickness, printing orientation and delay, on the compressive strength and dimensional error of the parts. The results show that an increase in the delay time in X orientation results in better binder spreading and uniformity followed by improvement in the compression strength. Furthermore, more binder spreads in the vertical direction leads to the higher dimensional error in the Z direction. The results proved that the RSM provides a time and cost-efficient design to print the prototypes with optimum strength and dimensional error.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable