Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T00:54:57.061Z Has data issue: false hasContentIssue false

Piezoresistive characterization of graphene/metakaolin based geopolymeric mortar composites

Published online by Cambridge University Press:  28 November 2017

C. Lamuta*
Affiliation:
Beckman Institute, University of Illinois at Urbana-Champaign, Urbana, IL, 61801, USAUniversity of Calabria, DIMEG, Ponte P. Bucci, cubo 44C, 87030 Arcavacata di Rende (CS)
L. Bruno
Affiliation:
University of Calabria, DIMEG, Ponte P. Bucci, cubo 44C, 87030 Arcavacata di Rende (CS)
S. Candamano
Affiliation:
University of Calabria, DIATIC, Ponte P. Bucci, cubo 44A, 87030 Arcavacata di Rende (CS)
L. Pagnotta
Affiliation:
University of Calabria, DIMEG, Ponte P. Bucci, cubo 44C, 87030 Arcavacata di Rende (CS)
*
*Corresponding author: caterinalamuta@gmail.com
Get access

Abstract

Geopolymers are recently developed ceramic materials produced by alkaline activation of thermally activated natural materials such as metakaolin. Due to their promising application in the field of structural components, the presence of a piezoresistive effect is a very useful property for such materials because it allows the real time self-monitoring of civil infrastructures. As observed for cement-based materials, the use of a conductive filler can enhance the piezoresistive response by avoiding measuring issues related to the electrical polarization. In this work we present preliminary results about the piezoresistive characterization of a metakaolin based geopolymeric mortar filled with graphene nanoplatelets. Composites with different graphene weight concentrations (0, 0.1, 0.5, 1%) were produced and the gauge factor (the ratio between the electrical resistance variation and the imposed strain) was calculated by means of dynamic four-probe resistance measurements. Very high gauge factor values (in the range of 1000-2000) were recorded and they can vary according to the dispersion quality of the graphene nanoplatelets into the ceramic matrix.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable