Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T06:47:34.119Z Has data issue: false hasContentIssue false

Sensing properties of pellets based on mesoporous structures of ZnO

Published online by Cambridge University Press:  19 April 2016

R. Herrera-Rivera*
Affiliation:
Programa de Doctorado en Nanociencias y Nanotecnología, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional. México, D.F., MEXICO
A. M. Pineda
Affiliation:
Programa de Doctorado en Nanociencias y Nanotecnología, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional. México, D.F., MEXICO
M. de la L. Olvera
Affiliation:
Programa de Doctorado en Nanociencias y Nanotecnología, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional. México, D.F., MEXICODepartamento de Ingeniería Eléctrica, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional. México, D.F., MEXICO
A. Maldonado
Affiliation:
Programa de Doctorado en Nanociencias y Nanotecnología, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional. México, D.F., MEXICODepartamento de Ingeniería Eléctrica, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional. México, D.F., MEXICO
*
Get access

Abstract

Mesoporous zinc oxide nanopowders were synthesized by the homogenous precipitation method. Zinc acetate dissolved in water, at different molar concentrations, was used as Zn precursor, whereas ammonium carbonate ((NH4)2CO3) and ammonium hydroxide (NH4OH) were used to prepare the precipitant solutions. The precipitated powders were dried in a conventional drying chamber at 100°C for 1 h, and then calcined at 400°C during 2 h. Crystal structure of powders was determined by X-ray Diffraction (XRD), and the crystallite sizes were calculated from Scherrer’s formula. Morphological characteristics (size and shape) were analyzed from Scanning Electron Microscopy (SEM). The surface area and the pore volume were obtained from BET analysis. The hexagonal wurtzite phase was corroborated in all synthesized powders, irrespective of the synthesis conditions. From SEM micrographs different structures, depending on the experimental routes, were observed. In order to test the sensing properties of the ZnO nanopowders, 10 mm diameter pellets were manufactured and then measured in a propane (C3H8) atmosphere at different gas concentrations and temperatures. Pellets processed from ZnO powders at 0.05, 0.35, and 0.5 M presented the highest sensitivity, 413, 532, at 300°C and 500 ppm of C3H8.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable