Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T11:18:38.701Z Has data issue: false hasContentIssue false

Synthesis and characterization of TiO2 using sol-gel method at different annealing temperatures

Published online by Cambridge University Press:  26 February 2018

H. Elbushra*
Affiliation:
Department of Physics, Al Neelain University, PO Box12702.Khartoum, Sudan
M. Ahmed
Affiliation:
Physics Department, National Ribat University, Khartoum, Sudan
H. Wardi
Affiliation:
Physics Department, Omdurman Alahlia University, Khartoum, Sudan
N. Eassa
Affiliation:
Department of Physics, Al Neelain University, PO Box12702.Khartoum, Sudan
*
*E-mail: hdeelalamin@gmail.com(corresponding author)
Get access

Abstract

This article aims to prepare high quality of TiO2 powder and study the effect of annealing temperature. TiO2 particles were synthesized by sol-gel method using titanium tetra chloride (TiCl4) as a precursor. The dried gel was annealed at temperatures of 500oC, 600oC, 700°C and 800 °C each for 4 hours. The as-prepared samples were further characterized using X-Ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X-ray Fluorescence spectrometer (EDX), XRD showed anatase structure after annealing and its diffraction scattering intensity indicated the improvement in the crystal structure quality of TiO2 as the temperature increases. SEM micrographs showed a randomly distributed and non-uniform cluster of TiO2 that has a size increase with annealing temperatures. EDX indicated stoichiometric chemical composition between Ti and O enhanced by annealing.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable