Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T23:07:04.625Z Has data issue: false hasContentIssue false

Tuning Electrode Properties and Surface Contacts for Uniform Deposits Produced by Atmospheric Plasma Dielectric Barrier Discharge Reactors

Published online by Cambridge University Press:  11 January 2018

Chi-Chin Wu*
Affiliation:
Energetic Materials Science Branch, Lethality Division, Weapons and Materials Research Directorate, US Army Research Laboratory, Aberdeen Proving Ground, Maryland 21005, USA
Timothy A. Jenkins
Affiliation:
Energetic Materials Science Branch, Lethality Division, Weapons and Materials Research Directorate, US Army Research Laboratory, Aberdeen Proving Ground, Maryland 21005, USA
James K. Hirvonen
Affiliation:
Coatings, Corrosion and Engineered Polymers Branch, Materials and Manufacturing Science Division, Weapons and Materials Research Directorate, US Army Research Laboratory, Aberdeen Proving Ground, Maryland 21005, USA
Michael Leadore
Affiliation:
Energetic Materials Science Branch, Lethality Division, Weapons and Materials Research Directorate, US Army Research Laboratory, Aberdeen Proving Ground, Maryland 21005, USA
Get access

Abstract

An investigation of the effect of experimental parameters on the temperature and uniformity of material deposition by atmospheric pressure dielectric barrier discharge (DBD) planar plasma reactors was conducted. The apparatus consisted of a pulsed AC high voltage power source with various electrode materials (aluminum, copper wire mesh, and aluminum/copper wire mesh) operating under a range of load resistances. Possible effects of non-ideal interfacial conditions for the contact surface between the electrode and the substrate were also studied with various modified surface thermal conditions. It was found that a hybrid electrode design with a fine copper (Cu) wire mesh attached to an aluminum plate of approximately 3 mm thickness produced the most visually uniform deposit, presumably as a result of both the superior conductivity provided by the Al metal plate and the stable plasma resulting from the relatively low breakdown voltage by using helium (He) as the dilution gas. Although the experimental conditions of plasma-enhanced chemical vapor deposition (PECVD) are often specific to particular systems and applications, this work provides insights on technical details which can be applied to various plasma DBD reactors.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable