Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T17:58:39.345Z Has data issue: false hasContentIssue false

Additive Manufacturing, Modeling and Performance Evaluation of 3D Printed Fins for Surfboards

Published online by Cambridge University Press:  31 January 2017

Reece D. Gately
Affiliation:
Soft Materials Group, School of Chemistry, University of Wollongong, Wollongong, NSW 2522, Australia
Stephen Beirne
Affiliation:
Australian National Fabrication Facility Materials Node, University of Wollongong, Wollongong, NSW 2522, Australia
Geoff Latimer
Affiliation:
Jones Beach Boardriders Inc., Kiama Downs, NSW 2533, Australia
Matthew Shirlaw
Affiliation:
Jones Beach Boardriders Inc., Kiama Downs, NSW 2533, Australia
Buyung Kosasih
Affiliation:
School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, NSW 2522, Australia
Andrew Warren
Affiliation:
School of Geography and Sustainable Communities, University of Wollongong, Wollongong, NSW 2522, Australia
Julie R. Steele
Affiliation:
Biomechanics Research Laboratory, School of Medicine, University of Wollongong, NSW 2522, Australia
Marc in het Panhuis*
Affiliation:
Soft Materials Group, School of Chemistry, University of Wollongong, Wollongong, NSW 2522, AustraliaAustralian National Fabrication Facility Materials Node, University of Wollongong, Wollongong, NSW 2522, AustraliaJones Beach Boardriders Inc., Kiama Downs, NSW 2533, AustraliaARC Centre of Excellence for Electromaterials Science, AIIM Facility, University of Wollongong, Wollongong, NSW 2522, Australia
*

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

We demonstrate that Additive Manufacturing (3D printing) is a viable approach to rapidly prototype personalised fins for surfboards. Surfing is an iconic sport that is extremely popular in coastal regions around the world. We use computer aided design and 3D printing of a wide range of composite materials to print fins for surfboards, e.g. ABS, carbon fibre, fibre glass and amorphous thermoplastic poly(etherimide) resins. The mechanical characteristics of our 3D printed fins were found to be comparable to commercial fins. Computational fluid dynamics was employed to calculate longitudinal (drag) and tangential (turning) forces, which are important for surfboard maneuverability, stability and speed. A commercial tracking system was used to evaluate the performance of 3D printed fins under real-world conditions (i.e. surfing waves). These data showed that the surfing performance of surfboards with 3D printed fins is similar to that of surfboards with commercial fins.

Information

Type
Articles
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
Copyright © Materials Research Society 2017