Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T22:58:31.906Z Has data issue: false hasContentIssue false

Approaches to the development of environmentally friendly and resource-saving technology for solar-grade silicon production

Published online by Cambridge University Press:  15 July 2019

Sergey M. Karabanov*
Affiliation:
Ryazan State Radio Engineering University, 59/1 Gagarina St., Ryazan390005, Russia
Dmitriy V. Suvorov
Affiliation:
Ryazan State Radio Engineering University, 59/1 Gagarina St., Ryazan390005, Russia
Dmitry Y. Tarabrin
Affiliation:
Ryazan State Radio Engineering University, 59/1 Gagarina St., Ryazan390005, Russia
Evgeniy V. Slivkin
Affiliation:
Ryazan State Radio Engineering University, 59/1 Gagarina St., Ryazan390005, Russia
Andrey S. Karabanov
Affiliation:
Helios Resource Ltd., 126 Proletarskaya St., Saransk430001, Mordovia, Russia
Oleg A. Belyakov
Affiliation:
Helios Resource Ltd., 126 Proletarskaya St., Saransk430001, Mordovia, Russia
Andrey A. Trubitsyn
Affiliation:
Ryazan State Radio Engineering University, 59/1 Gagarina St., Ryazan390005, Russia
Andrey Serebryakov
Affiliation:
Ryazan State Radio Engineering University, 59/1 Gagarina St., Ryazan390005, Russia
*
Get access

Abstract

Currently, the main material for the production of solar cells is still silicon. More than 70% of the global production of solar cells are silicon based. For solar-grade silicon production the technologies based on the reduction of silicon from organosilicon compounds are mainly used. These technologies are energy-consuming, highly explosive and unsustainable.

The present paper studies the technology of purification of metallurgical-grade silicon by vacuum-thermal and plasma-chemical treatment of silicon melt under electromagnetic stirring using numerical simulation and compares this technology with the existing ones (silane technologies and Elkem Solar silicon (ESS) production process) in terms of energy consumption, environmental safety and the process scalability.

It is shown that the proposed technology is environmentally safe, scalable and has low power consumption. The final product of this technology is multicrystalline silicon, ready for silicon wafer production.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable