Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T19:52:33.326Z Has data issue: false hasContentIssue false

Design and Processing of Alumina Plate Composites for Ballistic Nacre Alumina Structures

Published online by Cambridge University Press:  02 January 2018

A. Haynes*
Affiliation:
U.S. Army Armaments Graduate School at Picatinny Arsenal, Picatinny Arsenal, NJ, United StatesArmaments Engineering Analysis and Manufacturing Directorate, U.S. Army Research Development and Engineering Center, Picatinny Arsenal, NJ, United States.
L. Reinhardt
Affiliation:
Armaments Engineering Analysis and Manufacturing Directorate, U.S. Army Research Development and Engineering Center, Picatinny Arsenal, NJ, United States.
C. Lim
Affiliation:
U.S. Army Armaments Graduate School at Picatinny Arsenal, Picatinny Arsenal, NJ, United StatesArmaments Engineering Analysis and Manufacturing Directorate, U.S. Army Research Development and Engineering Center, Picatinny Arsenal, NJ, United States.
Get access

Abstract

Nacre is a hierarchical multi-composite matrix consisting of mineral plate-like structures stacked up similar to brick and mortar. When impacted with a projectile this type of structure is expected to reduce the overall shock loading into the system as well as projectile velocity as a consequence of variations in structural stiffness between the composite plates and the organic interlayers. Bio-mimicked nacre derived from alumina as the base ceramic is also shown to have increased fracture toughness over an alumina monolith. One challenge to building the nacre alumina structure is the design and processing of the composite mineral plates which should be comprised of roughly 90-95% nano-filler and 5-10% organic binder. In order for these plates to accurately mimic the nacre mineral plates they must also emulate aspect ratios on the order of 1:10 to 1:20. This paper will discuss the design and processing of nacre-alumina plates for studies into the impact behavior of nacre composites.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable