Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T03:51:56.756Z Has data issue: false hasContentIssue false

Facile and Scalable Synthesis of Copolymer-Sulfur Composites as Cathodes for High Performance Lithium-Sulfur Batteries

Published online by Cambridge University Press:  21 June 2017

Jingjing Liu
Affiliation:
Materials Science and Engineering Program, University of California, Riverside, CA, 92521, USA
Brennan Campbell
Affiliation:
Materials Science and Engineering Program, University of California, Riverside, CA, 92521, USA
Rachel Ye
Affiliation:
Mechanical Engineering Department, University of California, Riverside, CA, 92521, USA
Jeffrey Bell
Affiliation:
Materials Science and Engineering Program, University of California, Riverside, CA, 92521, USA
Zafer Mutlu
Affiliation:
Materials Science and Engineering Program, University of California, Riverside, CA, 92521, USA
Changling Li
Affiliation:
Materials Science and Engineering Program, University of California, Riverside, CA, 92521, USA
Yiran Yan
Affiliation:
Materials Science and Engineering Program, University of California, Riverside, CA, 92521, USA
Mihri Ozkan
Affiliation:
Materials Science and Engineering Program, University of California, Riverside, CA, 92521, USAElectrical and Computer Engineering Department, University of California, Riverside, CA, 92521, USA
Cengiz Ozkan*
Affiliation:
Materials Science and Engineering Program, University of California, Riverside, CA, 92521, USAMechanical Engineering Department, University of California, Riverside, CA, 92521, USA
*
Get access

Abstract

To promote the energy density of lithium-ion battery, the sulfur-based cathode has attracted extensive attention because of its high specific capacity of 1672 mAh g-1 and its high abundance. However, the sulfur shuttling effects and the loss of active material during lithiation hinder its commercial application. To tackle these issues, we synthesized a stable copolymer-sulfur composite by chemically binding sulfur. The composite with 86% sulfur content was prepared using 1,3-diethynylbenzen and sulfur particles via scalable invers vulcanization. The sulfur content in copolymer sulfur was achieved as high as 86%. Our copolymer-sulfur composite cathode showed excellent cycling performance with a specific capacity of 454 mAh g-1 at 0.1 C after 300 cycles. We demonstrate that the organosulfur-DEB units in the copolymer-sulfur composite serve as the ‘plasticizer’ to effectively prevent the polysulfide shuttling.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable