Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T08:30:00.340Z Has data issue: false hasContentIssue false

A facile synthesis method and fracture toughness evaluation of catfish bones-derived hydroxyapatite

Published online by Cambridge University Press:  10 March 2020

E.S Akpan
Affiliation:
Department of Mechanical Engineering, Ahmadu Bello University, Zaria, Nigeria
M. Dauda
Affiliation:
Department of Mechanical Engineering, Ahmadu Bello University, Zaria, Nigeria
L.S Kuburi
Affiliation:
Department of Mechanical Engineering, Ahmadu Bello University, Zaria, Nigeria
D.O Obada*
Affiliation:
Department of Mechanical Engineering, Ahmadu Bello University, Zaria, NigeriaAfrica Center of Excellence on New Pedagogies in Engineering Education, Ahmadu Bello University, Zaria, Nigeria
*
*Corresponding author: doobada@abu.edu.ng
Get access

Abstract

In this study, biological hydroxyapatite (HAp) was synthesized from catfish (Pangasius hypophthalmus) bones. First, the as-received catfish bones were de-proteinized in open air, and then converted to HAp by a solid state heat treatment method at a temperature of 900 °C for a holding time of 2 h in a muffle furnace. X-ray diffraction (XRD) analysis confirmed that HAp with high crystallinity of 99.9% was formed matching the structural properties of flouro-apatite with crystallite sizes of approximately 37.1 nm. The morphology of the HAp prepared showed irregularly shaped particles and revealed the appearance of open pores with a less agglomerated structure and a Ca/P ratio of about 1.58. The specific mechanical properties: hardness, compressive strength and fracture toughness of the catfish derived scaffolds were recorded as 480 MPa, 1.92 MPa, and 5.72 Mpa.m1/2, respectively. The fracture toughness of the HAp derived scaffolds suggests that the produced biomaterial is promising for biomedical applications. These findings are useful for the production and application of the HAp powders prepared from catfish bones, and further suggests a possible low-cost route for producing inexpensive ceramics using natural catfish bones.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable