Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-19T04:00:48.336Z Has data issue: false hasContentIssue false

Formation of TiO2 Electrically Insulated Oxide Coatings in Mode of Alternating Current Application

Published online by Cambridge University Press:  20 June 2016

Sergey M. Karabanov*
Affiliation:
Ryazan State Radio Engineering University 59/1 Gagarina St., Ryazan 390005, Russia
Dmitry V. Suvorov
Affiliation:
Ryazan State Radio Engineering University 59/1 Gagarina St., Ryazan 390005, Russia
Gennady P. Gololobov
Affiliation:
Ryazan State Radio Engineering University 59/1 Gagarina St., Ryazan 390005, Russia
Yulia M. Stryuchkova
Affiliation:
Ryazan State Radio Engineering University 59/1 Gagarina St., Ryazan 390005, Russia
Maria A. Klyagina
Affiliation:
Ryazan State Radio Engineering University 59/1 Gagarina St., Ryazan 390005, Russia
Evgeniy V. Slivkin
Affiliation:
Ryazan State Radio Engineering University 59/1 Gagarina St., Ryazan 390005, Russia
*
Get access

Abstract

The paper presents the research results of formation peculiarities of barrier electrically insulated coatings based on titanium oxide (TiO2) under conditions of AC-DC electrochemical anodizing. It is shown that overlapping of AC component (at the frequency of 100 kHz – 10 MHz) leads to formation of coatings 1.2-1.4 times thicker. Dependences of the coating thickness on frequency under various ratios of the AC-component amplitude to the DC-component of anodizing voltage have been obtained.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable