Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T09:58:56.133Z Has data issue: false hasContentIssue false

Gas Sensor Devices based on CuO- and ZnO- Nanowires directlysynthesized on silicon substrate

Published online by Cambridge University Press:  07 April 2016

R. Wimmer-Teubenbacher*
Affiliation:
Materials for Microelectronics, Materials Center Leoben Forschung GmbH, Roseggerstrasse 12, 8700 Leoben, Austria
E. Lackner
Affiliation:
Materials for Microelectronics, Materials Center Leoben Forschung GmbH, Roseggerstrasse 12, 8700 Leoben, Austria
J. Krainer
Affiliation:
Materials for Microelectronics, Materials Center Leoben Forschung GmbH, Roseggerstrasse 12, 8700 Leoben, Austria
S. Steinhauer
Affiliation:
Okinawa Institute of Science and Technology (OIST) Graduate University, 1919-1 Onna-Son, Okinawa 904-0495, Japan
A. Koeck
Affiliation:
Materials for Microelectronics, Materials Center Leoben Forschung GmbH, Roseggerstrasse 12, 8700 Leoben, Austria
Get access

Abstract

In-situ grown CuO and ZnO nanowire (NW) arrays were evaluated for their gassensing performance. The metal structures were fabricated by standard e-beamlithography, thermal evaporation and lift-off process onto a silicon substratewith gold electrodes. After integration onto a test structure with resistiveheater and thermocouple for temperature control, the samples were thermallyoxidized at 400°C. During thermal oxidation, nanowires were grownbetween the oxidized metal structures. The gas sensing performance of the NWarray was tested for carbon monoxide, - and a hydrocarbon-mixture (acetylene,ethane, ethene, and propene) at three relative humidity levels.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable