Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-18T04:51:22.426Z Has data issue: false hasContentIssue false

Metasurfaces with Fano resonances for directionally selective thermal emission

Published online by Cambridge University Press:  20 July 2016

Enas Sakr
Affiliation:
School of Electrical and Computer Engineering, 505 Northwestern Ave., Purdue University, West Lafayette, IN 47907, U.S.A.
Deanna Dimonte
Affiliation:
School of Electrical and Computer Engineering, 505 Northwestern Ave., Purdue University, West Lafayette, IN 47907, U.S.A.
Peter Bermel*
Affiliation:
School of Electrical and Computer Engineering, 505 Northwestern Ave., Purdue University, West Lafayette, IN 47907, U.S.A.Birck Nanotechnology Center, 1205 West State Street, Purdue University, West Lafayette, IN 47907, U.S.A.
*
Get access

Abstract

Thermal emission impacts a wide variety of applications, including thermophotovoltaics, photovoltaics, photon-enhanced thermionic emission, selective solar absorption, incandescent lighting, and spectroscopy. Ordinary structures generally emit a broad range of wavelengths, angles, and polarizations. However, highly selective thermal emission has potential to greatly improve performance in many of these applications. While prior work has explored a wide range of structures to provide some degree of control of one or more of these attributes, there is an ongoing challenge in combining readily-fabricated, simple structures made of appropriate (e.g., heat-resistant) materials with the desired functionality. Here, we will focus on using metasurfaces in conjunction with refractory materials as a platform for achieving selective control of emission. These structures are built from sub-wavelength elements that support localization of surface plasmon polaritons or electromagnetic resonant modes with appropriate attributes. Modeling is performed using rigorous coupled wave analysis (RCWA), plus Kirchhoff’s law of thermal radiation, which is further validated using finite-difference time domain (FDTD) simulations and coupled-mode analysis. Such structures can be considered arbitrarily directional sources that can be carefully patterned in lateral directions to yield a thermal lens with a designed focal length and/or concentration ratio; the benefit of this approach is that it can enhance the view factor between thermal emitters and receivers, without restricting the area ratio or separation distance. This design and modeling platform is then applied to exclude thermal radiation over a certain range of angles. In this work, we study the effect of controlling the angular width and direction on the view factor, and we explore angular dependence of these angular selective structures.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable