Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T23:06:31.095Z Has data issue: false hasContentIssue false

Method Development for High Temperature In-Situ Neutron Diffraction Measurements of Glass Crystallization on Cooling from Melt

Published online by Cambridge University Press:  28 January 2019

John McCloy*
Affiliation:
School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, USAMaterials Science and Engineering Program, Washington State University, Pullman, WA, USAPacific Northwest National Laboratory, Richland, WA, USA
José Marcial
Affiliation:
School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, USAMaterials Science and Engineering Program, Washington State University, Pullman, WA, USA
Brian Riley
Affiliation:
School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, USAMaterials Science and Engineering Program, Washington State University, Pullman, WA, USAPacific Northwest National Laboratory, Richland, WA, USA
Jörg Neuefeind
Affiliation:
Spallation Neutron Source, Oak Ridge National Laboratory, Oak Ridge, TN, USA
Jarrod Crum
Affiliation:
Pacific Northwest National Laboratory, Richland, WA, USA
Deepak Patil
Affiliation:
School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, USA
*
Get access

Abstract

A glass-ceramic borosilicate waste form is being considered for immobilization of waste streams of alkali, alkaline-earth, lanthanide, and transition metals generated by transuranic extraction for reprocessing used nuclear fuel. Waste forms are created by partial crystallization on cooling, primarily of oxyapatite and powellite phases. In-situ neutron diffraction experiments were performed to obtain detailed information about crystallization upon cooling from 1200°C. The combination of high temperatures and reactivity of borosilicate glass with typical containers used in neutron experiments, such as vanadium and niobium, prevented their use here. Therefore, methods using sealed thick-walled silica ampoules were developed for the in-situ studies. Unexpectedly, high neutron absorption, low crystal fraction, and high silica container background made quantification difficult for these high temperature measurements. As a follow-up, proof-of-concept measurements were performed on different potential high-temperature container materials, emphasizing crystalline materials so that residual glass in the waste form sample could be more easily analyzed. Room temperature measurements were conducted with a pre-crystallized sample in ‘ideal’ containers stable at low temperatures (i.e., vanadium and thin-wall silica capillaries) and compared to the same measurements in containers stable at high temperatures (i.e, platinum, single crystal sapphire, and thick-walled silica ampoules). Results suggested that Pt is probably the best choice if suitably sealed to prevent contamination from the sample after neutron activation.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable