Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T16:07:27.683Z Has data issue: false hasContentIssue false

Optical Modeling of Copper Oxide Nanoleaves Synthesized by Hot Water Treatment

Published online by Cambridge University Press:  03 July 2020

Khalidah H. Al-Mayalee*
Affiliation:
Physics Department, Faculty of Education for Girels, University of Kufa, Najaf, IraqDepartment of Physics and Astronomy, University of Arkansas at Little Rock, Little Rock, AR72204, USA
Tansel Karabacak
Affiliation:
Department of Physics and Astronomy, University of Arkansas at Little Rock, Little Rock, AR72204, USA
Get access

Abstract

In this study, optical absorption properties of copper oxide (II) (CuO) nanoleaf structures grown by hot water treatment (HWT) method were investigated by a numerical simulation method and were compared to experimental results. For this purpose, 3D CuO nanoleaves (NLs) were synthesized by HWT, which simply involved immersing a Cu plate or thin film sample in hot deionized (DI) water. For comparison, we prepared a conventional CuO thin film by thermal oxidation of copper film at about 300 °C. Optical transmission and reflection were measured by UV/Vis/NIR (ultraviolet-visible-near-infrared) spectrophotometer, which were used to calculate optical absorptance. Numerical simulation was performed with finite difference time domain (FDTD) simulation software. Reflectance, transmittance, and absorptance of CuO NLs of different roughness (i.e. CuO NLs layer thickness) were calculated through FDTD method and compared with the experimental results. FDTD simulations predict that nanoleaves morphology enhances light absorption by improving diffuse light scattering and light trapping properties which effectively increases the optical path length without using more material as compared to the thin film structure. This can be useful for developing thinner nanostructured optoelectronic devices with low cost and high efficiency.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable