Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T20:47:57.342Z Has data issue: false hasContentIssue false

Potential Use of Ambient-Cured Geopolymers for Intermediate Level Nuclear Waste Storage

Published online by Cambridge University Press:  16 March 2018

Supphatuch Ukritnukun*
Affiliation:
School of Materials Science and Engineering, UNSW Sydney, Sydney, NSW 2052, Australia;
Charles Christopher Sorrell
Affiliation:
School of Materials Science and Engineering, UNSW Sydney, Sydney, NSW 2052, Australia;
Daniel Gregg
Affiliation:
Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW 2234, Australia
Eric R. Vance
Affiliation:
Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW 2234, Australia
Pramod Koshy
Affiliation:
School of Materials Science and Engineering, UNSW Sydney, Sydney, NSW 2052, Australia;
Get access

Abstract

There is growing interest in reducing the use of ordinary Portland cement (OPC) owing to its high energy consumption and CO2 emissions. An environmentally-friendly alternative is the use of geopolymers, which can potentially reduce direct CO2 emissions through the appropriate choice of raw materials, mix design, and curing regimes. In this regard geopolymer mortars are also realistic candidates for the replacement of OPC mortars in nuclear waste immobilisation applications as they provide a more durable incorporation matrix as well as suppressing the formation of radiolytic hydrogen. The advantages of geopolymers over OPC for nuclear waste immobilisation include i) lower water content as alkaline activator is the main component that drives geopolymerisation, ii) higher thermal stability (<600°-800°C) compared to OPC concrete (<300°C), iii) higher compressive strength (50-80 MPa), and iv) lower leachability of radioactive ions when the mix design and curing temperature are appropriately balanced. UNSW and ANSTO have embarked on a long-term research program to investigate the possibility of using geopolymers for the immobilisation of Intermediate Level Liquid Waste (ILLW), the focus of which will be around the influence of gamma-irradiation on the durability.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable