Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T14:02:57.217Z Has data issue: false hasContentIssue false

Preliminary evaluation of the physical properties of red ceramic incorporated with solid residue

Published online by Cambridge University Press:  31 December 2018

Francine M. Nunes
Affiliation:
Federal University of Pelotas (UFPEL), Program Post Graduate in Materials Science and Engineering, Street Gomes Carneiro, number 1, Pelotas-RS, Brasil
Eduarda M. Rangel*
Affiliation:
Federal University of Pelotas (UFPEL), Program Post Graduate in Materials Science and Engineering, Street Gomes Carneiro, number 1, Pelotas-RS, Brasil
Fernando M. Machado
Affiliation:
Federal University of Pelotas (UFPEL), Program Post Graduate in Materials Science and Engineering, Street Gomes Carneiro, number 1, Pelotas-RS, Brasil
Rubens Camaratta
Affiliation:
Federal University of Pelotas (UFPEL), Program Post Graduate in Materials Science and Engineering, Street Gomes Carneiro, number 1, Pelotas-RS, Brasil
Letícia P. Cardoso
Affiliation:
Federal University of Pelotas (UFPEL), Undergraduate in Materials Engineering
Lucas J. Nascimento
Affiliation:
Federal University of Pelotas (UFPEL), Undergraduate in Materials Engineering
Get access

Abstract

The food processing industry highlights the daily generation of large amounts of eggshell solid residue. In this way, this residue becomes a non renewable raw material to be reused as an additive in red ceramics, in order to reduce the volume of disposal to the environment and improve the physical properties of the product. The objective of this work was to evaluate the forming moisture, linear shrinkage of drying and shrinkage of drying burning of ceramic test pieces (CS’s) with formulations with 2% and 3% of white eggshell residue (ER) incorporated in clay. The clay and ER were collected in the city of Pelotas-RS. The ER sample was analyzed by X-Ray Fluorescence (XRF) and X-Ray Diffraction (XRD). After pressing, natural and artificial drying was carried out and the CS’s were burned. These were evaluated through normative parameters C-020/95, C-021/95 and C-026/95. The values obtained for the forming moisture were between 5.82 and 8.78%, for the linear shrinkage of drying between 0.10 and 0.43% and, for the linear contraction burning between -0.29 and 0.08%. The results showed that the addition of ER to the ceramic mass helped in the reduction of the forming moisture and the linear shrinkage of the ceramic test pieces.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable