Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T19:19:17.780Z Has data issue: false hasContentIssue false

A preliminary validation study of PuO2 incorporation into zirconolite glass-ceramics

Published online by Cambridge University Press:  30 January 2018

Stephanie M. Thornber*
Affiliation:
Immobilisation Science Laboratory, Materials Science and Engineering Dept., The University of Sheffield, Mapping Street, Sheffield, S1 3JD, UK
Martin C. Stennett
Affiliation:
Immobilisation Science Laboratory, Materials Science and Engineering Dept., The University of Sheffield, Mapping Street, Sheffield, S1 3JD, UK
Eric R. Vance
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, Locked Bag 2001, NSW 2232, Australia
Dorji T. Chavara
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, Locked Bag 2001, NSW 2232, Australia
Ian Watson
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, Locked Bag 2001, NSW 2232, Australia
Miodrag Jovanovic
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, Locked Bag 2001, NSW 2232, Australia
Joel Davis
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, Locked Bag 2001, NSW 2232, Australia
Daniel Gregg
Affiliation:
Australian Nuclear Science and Technology Organisation, Kirrawee DC, Locked Bag 2001, NSW 2232, Australia
Neil C. Hyatt
Affiliation:
Immobilisation Science Laboratory, Materials Science and Engineering Dept., The University of Sheffield, Mapping Street, Sheffield, S1 3JD, UK
*
*Corresponding author: sthornber1@sheffield.ac.uk
Get access

Abstract:

Zirconolite glass-ceramics are being developed as potential wasteforms for the disposition of Pu wastes in the UK. Previous studies utilised a variety of surrogates whilst this work uses both cold-press and sinter and hot isostatic press methods to validate the wasteform with PuO2. A cold press and sinter sample was fabricated as part of a validation study for plutonium incorporation in hot isostatically pressed (HIPed) wasteforms. The results confirmed the cold-press and sinter, achieved successful waste incorporation and a microstructure and phase assemblage that was in agreement with those expected of a HIPed equivalent. A HIP sample was fabricated of the same composition and characterised by SEM and XRD. Results were in agreement with the sintered sample and achieved complete waste incorporation into the glass-ceramic wasteform. These samples have demonstrated successful incorporation of PuO2 into glass-ceramic HIPed wasteforms proposed for processing Pu-based waste-streams in the UK.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable