Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T17:41:21.401Z Has data issue: false hasContentIssue false

Study of thermal and radiation stability of the extractant based on CMPO in fluorinated sulfones

Published online by Cambridge University Press:  27 December 2016

S.V. Stefanovsky*
Affiliation:
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry RAS, Moscow 119071, Russia
I.V. Skvortsov
Affiliation:
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry RAS, Moscow 119071, Russia
E.V. Belova
Affiliation:
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry RAS, Moscow 119071, Russia
A.V. Rodin
Affiliation:
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry RAS, Moscow 119071, RussiaScientific and Engineering Centre for Nuclear and Radiation Safety, Moscow 107140, Russia
Get access

Abstract

The two-phase systems of pure diluent FS-13 – aqueous solution of 14 mol/L nitric acid and 0.02 mol/L solution of CMPO in diluent FS-13 – aqueous solution of 14 mol/L HNO3 were studied at autoclave temperatures 170 °C and 200 °C. The effect of pre-irradiation on the kinetics of thermolysis was determined. All samples were irradiated using an electron accelerator at a dose rate of 10 kGy/h up to absorbed doses of 0.1, 0.5 and 1 MGy. The parameters of heat and gas emissions were determined during thermolysis of the studied extraction system in a closed apparatus. It has been shown that the conditions required for the growth of autocatalytic oxidation are not created during heating of the two-phase systems in closed vessels even for the extraction systems contacted with 14 mol/l HNO3 for two weeks.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable