Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T21:45:27.331Z Has data issue: false hasContentIssue false

Ternary lead-chalcogenide room-temperature mid-wave infrared detectors grown by spray-deposition

Published online by Cambridge University Press:  05 February 2018

Hussain Abouelkhair
Affiliation:
Physics, University of Central Florida, Orlando FL 32789, robert.peale@ucf.edu
Pedro N. Figueiredo
Affiliation:
Physics, University of Central Florida, Orlando FL 32789, robert.peale@ucf.edu
Seth R. Calhoun
Affiliation:
Physics, University of Central Florida, Orlando FL 32789, robert.peale@ucf.edu
Chris J. Fredricksen
Affiliation:
Physics, University of Central Florida, Orlando FL 32789, robert.peale@ucf.edu
Isaiah O. Oladeji
Affiliation:
SISOM Thin Films LLC, 1209 W. Gore St. Orlando FL 32805
Evan M. Smith
Affiliation:
KBRWyle, Beavercreek OH 45431Air Force Research Laboratory, Wright-Patterson AFB OH 45433
Justin W. Cleary
Affiliation:
Air Force Research Laboratory, Wright-Patterson AFB OH 45433
Robert E. Peale*
Affiliation:
Physics, University of Central Florida, Orlando FL 32789, robert.peale@ucf.edu
Get access

Abstract

Ternary lead chalcogenides, such as PbSxSe1-x, offer the possibility of room-temperature infrared detection with engineered cut-off wavelengths within the important 3-5 micron mid-wave infrared (MWIR) wavelength range. We present growth and characterization of aqueous spray-deposited thin films of PbSSe. Complexing agents in the aqueous medium suppress unwanted homogeneous reactions so that growth occurs only by the heterogeneous reaction on the hydrophilic substrate. The strongly-adherent films are smooth with a mirror-like finish. The films comprise densely packed grains with tens of nm dimensions and a total film thickness of ∼400-500 nm. Measured optical constants reveal absorption out to at least 4.5 μm wavelength and a ∼0.3 eV bandgap intermediate between those of PbS and PbSe. The semiconducting films are p-type with resistivity ∼1 and 85 Ohm-cm at 300 and 80 K, respectively. Sharp x-ray diffraction peaks identify the films as Clausthalite-Galena solid-state solution with a lattice constant that indicates an even mixture of PbS and PbSe. The photoconductive response is observed at both nitrogen and room temperature up to at least 2 kHz chopping frequency.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable