Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-15T22:40:41.691Z Has data issue: false hasContentIssue false
  • English
  • Français

Hot-Melt Adhesives

Published online by Cambridge University Press:  31 January 2011

C. W. Paul
Get access

Abstract

Hot-melt adhesives facilitate fast production processes because the adhesives set simply by cooling. Formulations contain polymers to provide strength and hot tack (resistance to separation while adhesive is hot), and tackifiers and/or oils to dilute the polymer entanglement network, adjust the glass-transition temperature, lower the viscosity, and improve wet-out (molecular contact of the adhesive with the substrate over the entire bonding area). Some adhesives also contain waxes to speed setting, lower viscosity, and improve heat resistance. Obtaining adequate strength and heat resistance from nonreactive hot melts requires that some component of the hot melt separate out into a dispersed but interconnected hard-phase network upon cooling. The hard phases are commonly either glassy styrene domains (for adhesives based on styrenic block copolymers) or organic crystallites (for adhesives based on waxes, olefinic copolymers, or ethylene copolymers). This article will describe first the material properties relevant to the processing and performance of hot-melt adhesives, then the chemistry and function of the specific raw materials used in hot melts, and will conclude with illustrative application examples and corresponding formulations.

Keywords

block copolymersethylene copolymershot-melt adhesiveslabelingpackagingpressure-sensitive adhesives (PSAs)tackifierswaxes

Information

Type
Research Article
Information
MRS Bulletin , Volume 28 , Issue 6: Materials Science of Adhesives: How to Bond Things Together , June 2003, pp. 440 - 444
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Georjon, O., Faissat, M., and Chambon, F., Adhes. Age (February 1999) p. 44.Google Scholar
2.Godfrey, D.A., U.S. Patent No. 5,763,516 (June 9, 1998).Google Scholar
3.Sustic, A. and Pellon, B., Adhes. Age (November 1991) p. 17.Google Scholar
4.Robe, G., in Proc. TAPPI Hot Melt Symposium (Technical Association of the Pulp and Paper Industry, Norcross, GA, 1992).Google Scholar
5.Eastman, E.F. and Fullhart, L., in Handbook of Adhesives, 3rd ed., edited by Skeist, I. (Van Nostrand Reinhold, New York, 1990) p. 408.CrossRefGoogle Scholar
6.Stauffer, D., Puletti, P.P., and Kauffman, T.F., U.S. Patent No. 5,331,033 (July 19, 1994).Google Scholar
7.Han, C.D., Kim, J., Kim, J.K., and Chu, S.G., Macromolecules 22 (1989) p. 3443.CrossRefGoogle Scholar
8.Han, C.D., Kim, J., Baek, D.M., and Chu, S.G., J. Polym. Sci., Part B: Polym. Phys. 28 (1990) p. 315.CrossRefGoogle Scholar
9.Ruckel, E. and Chu, W., in Proc. TAPPI Hot Melt Symposium (Technical Association of the Pulp and Paper Industry, Norcross, GA, 1998).Google Scholar