Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-14T04:46:41.203Z Has data issue: false hasContentIssue false
  • English
  • Français

Hydrogen Storage: High-Pressure Gas Containment

Published online by Cambridge University Press:  31 January 2011

R.S. Irani
Get access

Abstract

This review outlines the prospects for gaseous hydrogen, stored in high-pressure cylinders, as a fuel for automotive applications. Following an initial description of hydrogen embrittlement problems encountered in the past in steel cylinders, the article explores the use of other types of gas cylinders, including the recent examples of hoop-wound and fully wound composites. Central to the article is the concept of the volume of hydrogen transported for the minimum amount of container weight. Finally, the role of international standards in developing safe and efficient cylinders for this application is emphasized.

Keywords

carbon–glass hybridscomposite cylindershydrogen embrittlementhydrogen storageInternational Organization for Standardization (ISO)liquid-metal embrittlementultrasonic testing.

Information

Type
Research Article
Information
MRS Bulletin , Volume 27 , Issue 9: Hydrogen Storage , September 2002, pp. 680 - 682
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Pressouyre, G.M. and Zmudzinski, C., in Proc. Int. Seminar on Hydrogen as an Energy Carrier (1983) p. 356.Google Scholar
2.British Standard BS5045: Part 1: Appendix E: Transportable Gas Containers, Specification for Seamless Steel Containers above 0.5 Litre Water Capacity.Google Scholar
3.ISO 11114–1: Transportable Gas Cylinders—Compatibility of Cylinder and Valve Materials with Gas Contents—Part I: Metallic Materials (International Organization for Standardization, Geneva, Switzerland).Google Scholar
4.Irani, R.S. and Hayes, D.M., Integrity of Gas Containers (National Physical Laboratory, Teddington, U.K., 1984) p. 90.Google Scholar
5.Pressouyre, G.M., Acta Metall. 28 (1979) p. 89.CrossRefGoogle Scholar