Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T06:04:31.305Z Has data issue: false hasContentIssue false

Manipulation and statistical analysis of the fluid flow of polymer semiconductor solutions during meniscus-guided coating

Published online by Cambridge University Press:  18 December 2020

Leo Shaw
Affiliation:
Department of Chemical Engineering, Stanford University, USA
Ying Diao
Affiliation:
Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, USA
Geoffrey C. Martin-Noble
Affiliation:
Department of Chemical Engineering, Stanford University, USA
Hongping Yan
Affiliation:
Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, USA
Pascal Hayoz
Affiliation:
BASF Schweiz AG, Schweizerhalle, Switzerland
R. Thomas Weitz
Affiliation:
I. Physikalisches Institut, Georg-August-Universität Göttingen, Germany
Daniel Kaelblein*
Affiliation:
BASF SE, Ludwigshafen, Germany
Michael F. Toney*
Affiliation:
Department of Chemical and Biological Engineering, University of Colorado Boulder, USA
Zhenan Bao*
Affiliation:
Department of Chemical Engineering, Stanford University, USA
*
*Corresponding authors: Daniel Kaelblein, daniel.kaelblein@basf.com; Michael F. Toney, michael.toney@colorado.edu; Zhenan Bao, zbao@stanford.edu
*Corresponding authors: Daniel Kaelblein, daniel.kaelblein@basf.com; Michael F. Toney, michael.toney@colorado.edu; Zhenan Bao, zbao@stanford.edu
*Corresponding authors: Daniel Kaelblein, daniel.kaelblein@basf.com; Michael F. Toney, michael.toney@colorado.edu; Zhenan Bao, zbao@stanford.edu
Get access

Abstract

Recent work in structure–processing relationships of polymer semiconductors have demonstrated the versatility and control of thin-film microstructure offered by meniscus-guided coating (MGC) techniques. Here, we analyze the qualitative and quantitative aspects of solution shearing, a model MGC method, using coating blades augmented with arrays of pillars. The pillars induce local regions of high strain rates—both shear and extensional—not otherwise possible with unmodified blades, and we use fluid mechanical simulations to model and study a variety of pillar spacings and densities. We then perform a statistical analysis of 130 simulation variables to find correlations with three dependent variables of interest: thin-film degree of crystallinity and transistor field-effect mobilities for charge-transport parallel (μpara) and perpendicular (μperp) to the coating direction. Our study suggests that simple fluid mechanical models can reproduce substantive correlations between the induced fluid flow and important performance metrics, providing a methodology for optimizing blade design.

Information

Type
Article
Copyright
Copyright © The Author(s), 2020, published on behalf of Materials Research Society by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

Supplementary material: File

Shaw et al. Supplementary Material

Shaw et al. Supplementary Material

Download Shaw et al. Supplementary Material(File)
File 3.9 MB