Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T06:48:23.031Z Has data issue: false hasContentIssue false

Photovoltaic Efficiency Measurements

Published online by Cambridge University Press:  29 November 2013

Get access

Extract

A variety of performance indicators have been employed by the photovoltaic (PV) community to rate the performance of PV cells, modules, and arrays. The PV power conversion efficiency under a set of standard reporting conditions serves as a basis for meaningful comparisons of PV performance, within and among PV technologies. PV efficiency is defined as 100 times the maximum PV electrical power density produced divided by the incident light power at a reference PV temperature, total irradiance, and spectral irradiance. Standard reporting conditions commonly used by the PV community are summarized in Table I.

The direct and global reference spectra were generated by a comprehensive Monte-Carlo computer model and actually integrate to 768 W m−2 and 964 W m−2. The terrestrial PV community has arbitrarily assigned a 1-sun total irradiance of 1,000 W m−2 for the global and direct reference spectra. The term “direct” in Table I refers to the direct-normal (5° field of view about the sun) component of the global spectral irradiance distribution. The term “global” in Table I refers to the spectral irradiance distribution on a 37-tilted south-facing surface with a solar zenith angle of 48.2° (AM1.5). The terms AM1 or AM1.5 are often used to refer to standard spectra, but the relative optical air mass (AM) is a geometrical quantity and can be obtained by taking the secant of the angle between the sun and the zenith.

Information

Type
Research Report
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable