Hostname: page-component-74656f9884-2dmjx Total loading time: 0 Render date: 2026-11-10T09:58:04.412Z Has data issue: false hasContentIssue false
  • English
  • Français

Computer Applications in the Development of Steels

Published online by Cambridge University Press:  29 November 2013

Bo Sundman  and
John Ågren
Get access

Extract

Despite the fact that thermodynamic calculations, strictly speaking, apply only to equilibrium, they may of ten be used in nonequilibrium situations. If one or several of the stable phases are suppressed in the calculations, we have a metastable equilibrium, which is often of practical interest. For example, one may calculate the driving force available to form the more stable phases and model nucleation.

Thermodynamic calculations may be performed stepwise to predict microseg-regation during solidification by a Scheil-type calculation (no diffusion in the solid State, infinite diffusion in the liquid, and equilibrium at the interface). In such a calculation, no information other than the thermodynamic properties of the System is used.

A more ambitious approach is to com-bine the thermodynamic calculations with kinetic modeis (e.g., diffusion calculations) and thereby predict the rate of reactions. This approach is extremely powerful and may be used to simulate a wide range of different phenomena, including precipitation, homogenization, and diffusional interactionsbetween Substrate and coating.

It is usually assumed that thermodynamic equilibrium holds locally at the migrating phase interface between two phases, and the rate of transformation is calculated at each instant by solving a set of flux-balance equations. The fluxes are obtained from a numerical Solution of the multicomponent diffusion equations (see Reference 3).

Information

Type
Computer Simulations from Thermodynamic Data: Materials Production and Development
Information
MRS Bulletin , Volume 24 , Issue 4 , April 1999 , pp. 32 - 36
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Gustafson, Å. and Ågren, J., Acta Mat. 46 (1997) p. 81.CrossRefGoogle Scholar
2.Jansson, Å., thesis, Royal Institute of Technology, 1997.Google Scholar
3.Ågren, J., ISIJ Int. 32 (1992) p. 291.CrossRefGoogle Scholar
4.Hillert, M., Phase Equilibria, Phase Diagrams and Phase Transformations (Cambridge University Press, UK, 1998).Google Scholar
5.Sundman, B., Jansson, B., and Andersson, J-O., CALPHAD 9 (1985) p. 153.CrossRefGoogle Scholar
6.Ansara, I. and Sundman, B., in Computer Handlingand Dissemination of Data, edited by Glaeser, P.S. (Elsevier Science, North-Holland, 1987) p. 154.Google Scholar
7.Stawström, C. and Hillert, M., J. Iron Steel Inst. 207 (1969) p. 77.Google Scholar
8.Othani, H. and Ågren, J., Simulation of Crain Boundary Precipitation of M23C6, in Austenitic Stainless Steels, Internal Report MSE KTH (1991).Google Scholar
9.Andersson, J-O., Höglund, L., Jansson, B., and Ågren, J., Fundamental and Applications of Ternary Diffusion (Pergamon Press, New York, 1990). p. 153.CrossRefGoogle Scholar
10.Bendure, R.J., Ikenberry, L.C., and Waxweiler, J.H., Trans. AIME 221 (1961) p. 1032.Google Scholar
11. Quoted in Figure 15 of Reference 7.Google Scholar
12.Lifshitz, I.M. and Slyozov, V.V., Sov. Phys. JETP 35 (1959) p. 331.Google Scholar
13.Wagner, C., Z. Elektochemie 65 (1961) p. 581.Google Scholar
14.Fährmann, M., Fährmann, E., Pollock, T.M., and Johnson, W.C., Metall. Mater. Trans. A 28 (1997) p. 1943.CrossRefGoogle Scholar
15.Wey, M.Y., Sakuma, T., and Nishizawa, T., Trans. Jpn. Inst. Met. 22 (10) (1981) p. 733.CrossRefGoogle Scholar
16.Gustafson, Å., Höglund, L., and Ågren, J., presented at Advanced Heat Resistant Steels for Power Generation Conference, San Sebastian, Spain, April 27–29, 1998, preprint.Google Scholar
17.Lundin, L. (unpublished).Google Scholar
18.Engström, A., Höglund, L., and Ågren, J., Metall. Mater. Trans. A 25 (1994) p. 127.CrossRefGoogle Scholar
19.Heiander, T. and Ågren, J., Metall. Mater. Trans. A. 28 (1997) p. 303.CrossRefGoogle Scholar
20.Hack, K., ed., The SGTE Case Book (The Institute of Materials, UK, 1996).Google Scholar
21.Saunders, N. and Miodownik, A.P., CALPHAD, A Comprehensive Guide (Pergamon Materials Series, UK, 1998).Google Scholar