Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-14T04:33:05.238Z Has data issue: false hasContentIssue false
  • English
  • Français

Dislocation Plasticity in Thin Metal Films

Published online by Cambridge University Press:  31 January 2011

O. Kraft,
L. B. Freund,
R. Phillips and
E. Arzt
Get access

Abstract

This article describes the current level of understanding of dislocation plasticity in thin films and small structures in which the film or structure dimension plays an important role. Experimental observations of the deformation behavior of thin films, including mechanical testing as well as electron microscopy studies, will be discussed in light of theoretical models and dislocation simulations. In particular, the potential of applying strain-gradient plasticity theory to thin-film deformation is discussed. Although the results of all studies presented follow a “smaller is stronger” trend, a clear functional dependence has not yet been established.

Keywords

mechanical propertiesmetalsthin films.

Information

Type
Research Article
Information
MRS Bulletin , Volume 27 , Issue 1: Mechanical Properties in Small Dimensions , January 2002, pp. 30 - 37
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Nix, W.D., Metall. Trans. A 20A (1989) p. 2217.CrossRefGoogle Scholar
2.Brotzen, F.R., Int. Mat. Rev. 39 (1994) p. 24.CrossRefGoogle Scholar
3.Kraft, O. and Volkert, C.A., Adv. Eng. Mater. 3 (2001) p. 99.3.0.CO;2-2>CrossRefGoogle Scholar
4.Flinn, P.A., Gardner, D.S., and Nix, W.D., IEEE Trans. Electron Devices ED–34 (1987) p. 689.CrossRefGoogle Scholar
5.Flinn, P.A. and Chiang, C., J. Appl. Phys. 67 (1990) p. 2927.CrossRefGoogle Scholar
6.Flinn, P.A., J. Mater. Res. 6 (1991) p. 1498.CrossRefGoogle Scholar
7.Venkatraman, R. and Bravman, J.C., J. Mater. Res. 7 (1992) p. 2040.CrossRefGoogle Scholar
8.Volkert, C.A., Alofs, C.F., and Liefting, J.R., J. Mater. Res. 9 (1994) p. 1147.CrossRefGoogle Scholar
9.Vinci, R.P., Zielinski, E.M., and Bravman, J.C., Thin Solid Films 262 (1995) p. 142.CrossRefGoogle Scholar
10.Bader, S., Flinn, P.A., Arzt, E., and Nix, W.D., J. Mater. Res. 9 (1994) p. 318.CrossRefGoogle Scholar
11.Bader, S., Kalaugher, E.M., and Arzt, E., in Thin Films: Stresses and Mechanical Properties V, edited by Baker, S.P, Ross, C.A., Townsend, P.H., Volkert, C.A., and Børgesen, P. (Mater. Res. Soc. Symp. Proc. 356, Pittsburgh, PA, 1995) p. 435.Google Scholar
12.Besser, P.R., Brennan, S., and Bravman, J.C., J. Mater. Res. 9 (1994) p. 13.CrossRefGoogle Scholar
13.Moske, M.A., Ho, P.S., Mikalsen, D.J., Cuomo, J.J., and Rosenberg, R., J. Appl. Phys. 74 (1993) p. 1716.CrossRefGoogle Scholar
14.Keller, R.-M., Baker, S.P., and Arzt, E., J. Mater. Res. 13 (1998) p. 1307.CrossRefGoogle Scholar
15.Keller, R.-M., Baker, S.P., and Arzt, E., Acta Mater. 47 (1999) p. 415.CrossRefGoogle Scholar
16.Kraft, O. and Nix, W.D., in Materials Reliability in Microelectronics VIII, edited by Bravman, J.C., Marieb, T.N., Lloyd, J.R., and Korhonen, M.A. (Mater. Res. Soc. Symp. Proc. 516, Warrendale, PA, 1998) p. 201.Google Scholar
17.Kobrinsky, M.J. and Thompson, C.V., Appl. Phys. Lett. 73 (1998) p. 2429.CrossRefGoogle Scholar
18.Kobrinsky, M.J. and Thompson, C.V., Acta Mater. 48 (2000) p. 625.CrossRefGoogle Scholar
19.Weiss, D., Gao, H., and Arzt, E., Acta Mater. 49 (2001) p. 2395.CrossRefGoogle Scholar
20.Ronay, M.Philos. Mag. A 40 (1979) p. 145.CrossRefGoogle Scholar
21.Shen, Y.-L., Suresh, S., He, M.Y., Bagchi, A., Kienzle, O., Rühle, M., and Evans, A.G., J. Mater. Res. 13 (1998) p. 1928.CrossRefGoogle Scholar
22.Ruud, J.A., Josell, D., Spaepen, F., and Greer, A.L., J. Mater. Res. 8 (1993) p. 112.CrossRefGoogle Scholar
23.Read, D.T. and Dally, J.W., J. Mater. Res. 8 (1993) p. 1542.CrossRefGoogle Scholar
24.Cornella, G., Vinci, R.P., Suryanarayanan Iyer, R., Dauskardt, R.H., and Bravman, J.C., in Microelectromechanical Structures for Materials Research, edited by Brown, S., Gilbert, J., Guckel, H., Howe, R., Johnson, G., Krulevitch, P., and Muhlstein, C. (Mater. Res. Soc. Symp. Proc. 518, Warrendale, PA, 1998) p. 81.Google Scholar
25.Read, D.T., Int. J. Fatigue 20 (1998) p. 203.CrossRefGoogle Scholar
26.Josell, D., van Heerden, D., Read, D., Bonevich, J., and Shechtman, D., J. Mater. Res. 13 (1998) p. 2902.CrossRefGoogle Scholar
27.Huang, H. and Spaepen, F., Acta Mater. 48 (2000) p. 3261.CrossRefGoogle Scholar
28.Thouless, M.D., Gupta, J., and Harper, J.M.E., J. Mater. Res. 8 (1993) p. 1845.CrossRefGoogle Scholar
29.Hommel, M., Kraft, O., and Arzt, E., J. Mater. Res. 14 (1999) p. 2373.CrossRefGoogle Scholar
30.Stach, E.A., Dahmen, U., and Nix, W.D., in Recent Developments in Oxide and Metal Epitaxy—Theory and Experiment, edited by Yeadon, M., Chiang, S., Farrow, R.F.C., Evans, J.W., and Auciello, O. (Mater. Res. Soc. Symp. Proc. 619, Warrendale, PA, 2000) p. 27.Google Scholar
31.Dehm, G., Inkson, B.J., Balk, T.J., Wagner, T., and Arzt, E., in Dislocations and Deformation Mechanisms in Thin Films and Small Structures, edited by Kraft, O., Schwarz, K.W., Baker, S.P., Freund, L.B., and Hull, R. (Mater. Res. Soc. Symp. Proc. 673, Warrendale, PA, 2001) p. P2.6.1.Google Scholar
32.Dehm, G., Weiss, D., and Arzt, E., Mater. Sci. Eng., A 309–310 (2001) p. 468.CrossRefGoogle Scholar
33.Weihnacht, V. and Brückner, W., Acta Mater. 49 (2001) p. 2365.CrossRefGoogle Scholar
34.Freund, L.B., J. Appl. Mech. 43 (1987) p. 553.CrossRefGoogle Scholar
35.Chaudhari, P., Philos. Mag. A 39 (1979) p. 507.CrossRefGoogle Scholar
36.Thompson, C.V., J. Mater. Res. 8 (1993) p. 237.CrossRefGoogle Scholar
37.Baker, S.P., Kretschmann, A., and Arzt, E., Acta Mater. 49 (2001) p. 2145.CrossRefGoogle Scholar
38.Hommel, M. and Kraft, O., Acta Mater. 49 (2001) p. 3935.CrossRefGoogle Scholar
39.Fleck, N.A. and Hutchinson, J.W., Adv. Appl. Mech. 33 (1997) p. 295.CrossRefGoogle Scholar
40.Cottrell, A.H., The Mechanical Properties of Matter (John Wiley & Sons, New York, 1964).Google Scholar
41.Ashby, M.F.Philos. Mag. 21(1970) p. 399.CrossRefGoogle Scholar
42.Müllner, P. and Arzt, E., in Thin Films: Stresses and Mechanical Properties VII, edited by Cammarata, R.C., Nastasi, M., Busso, E.P, and Oliver, W.C. (Mater. Res. Soc. Symp. Proc. 505, Warrendale, PA, 1998) p. 149.Google Scholar
43.Hurtado, J.A. and Freund, L.B., J.Elasticity 52 (1999) p. 167.CrossRefGoogle Scholar
44.Arzt, E., Dehm, G., Gumbsch, P., Kraft, O., and Weiss, D., Prog. Mater. Sci. 46 (2001) p. 283.CrossRefGoogle Scholar
45.Willis, J.R., Jain, S., and Bullough, R., Appl. Phys. Lett. 59 (1991) p. 920.CrossRefGoogle Scholar
46.Freund, L.B., Advances in Applied Mechanics, Vol. 30 (Academic Press, New York, 1993).Google Scholar
47.Nix, W.D., Scripta Mater. 39 (1998) p. 545.CrossRefGoogle Scholar
48.Schwarz, K.W., J. Appl. Phys. 85 (1999) p. 108.CrossRefGoogle Scholar
49.Schwarz, K.W., J. Appl. Phys. 85 (1999) p. 120.CrossRefGoogle Scholar
50.Robertson, C.F. and Fivel, M.C., J. Mater. Res. 14 (1999) p. 2251.CrossRefGoogle Scholar
51.Phillips, R., Rodney, D., Shenory, V., Tadmor, E., and Ortiz, M., Model. Simul. Mater. Sci. Eng. 7 (1999) p. 769.CrossRefGoogle Scholar
52.Kelchner, C.L., Plimpton, S.J., and Hamilton, J.C., Phys. Rev. B 58 (1998) p. 11085.CrossRefGoogle Scholar
53.Miller, R., Tadmor, E.B., Phillips, R., and Ortiz, M., Model. Simul. Mater. Sci. Eng. 6 (1998) p. 607.CrossRefGoogle Scholar
54.Pant, P., Schwarz, K.W., and Baker, S.P., in Dislocations and Deformation Mechanisms in Thin Films and Small Structures, edited by Kraft, O., Schwarz, K.W., Baker, S.P., Freund, L.B., and Hull, R. (Mater. Res. Soc. Symp. Proc. 673, Warrendale, PA, 2001) p. P2.2.1.Google Scholar
55.Nicola, L., van der Giessen, E., and Needleman, A., Mater. Sci. Eng. A 309–310 (2001) p. 274.CrossRefGoogle Scholar
56.Shu, J.Y, Fleck, N.A., van der Giessen, E., and Needleman, A., J. Mech. Phys. Solids 49 (2001) p. 1361.CrossRefGoogle Scholar
57.von Blanckenhagen, B., Gumbsch, P., and Arzt, E., Model. Simul. Mater. Sci. Eng. 9 (2001) p. 157.CrossRefGoogle Scholar
58.Frost, H.J. and Ashby, M.F., Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics (Pergamon Press, New York, 1982).Google Scholar
59.von Blanckenhagen, B. (unpublished results)Google Scholar