Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T00:41:10.880Z Has data issue: false hasContentIssue false

Limitations on the Use of Surface Doping for Improving High-Temperature Oxidation Resistance

Published online by Cambridge University Press:  29 November 2013

Get access

Extract

For more than 50 years, scientists have studied the “magic dust” of high-temperature oxidation—certain oxygen active or “reactive” elements which, when added to alloys in small quantities, effect profound improvements in their oxidation resistance. In general, high-temperature oxidation resistance is achieved by the oxidation of one or more alloy components to form a dense, stable, slow-growing, external oxide layer, or ’scale” such as α-Cr2O3, α-Al2O3, or SiO2. When added properly, reactive elements have a beneficial effect on the formation and growth of both α-Cr2O3 and α-Al2O3 scales. A standard list of reactive element (RE) effects would include: (1) an improvement in scale adhesion or resistance to spallation, (2) a change in the scale growth mechanism, (3) a reduction in the oxidation rate, related to the change in mechanism, (4) a modification in the scale microstructure, and (5) in the case of alloys that form Cr2O3 scales, an improvement in selective oxidation, meaning that a lower Cr concentration in the alloy is required to form and maintain an external Cr2O3 scale.

Information

Type
Corrosion and Coating
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable